Typical installation clearances for single and multiple unit applications
Side by Side
Note 1
Notes:
1. When equipped with economizer
or barometric relief damper, clearance
distance is to be measured from
protruding hood instead of base.
2. Clearance is the same if any unit
is rotated 180 degrees.
Weights
Table 1. Model weights, corner weights (lbs) and center of gravity dimensions (in.)
Tons
Unit Model No.
12.5
WHJ150
15
WHJ180
20
WHJ240
25
WHJ300
(a)
Weights are approximate. Weights do not include additional factory or field installed options/accessories. For option/accessory additional weights to be added to unit weight,