Set Up The Router As An Access Point - TP-Link Archer AX95 User Manual

Chapter 4
6. Click Save.
Tips:
• If you use Dynamic IP and
please go to Advanced >
• If you still cannot access the internet, refer to the
4 4

Set Up the Router as an Access Point

The router can work as an access point, transforming your existing wired network to a
wireless one.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced >
router will reboot and switch to Access Point mode.
PPPoE and you are provided with any other parameters that are not required on the page,
Network > Internet to complete the configuration.
FAQ
System > Operation
section for further instructions.
Mode, select Access Point
Set Up Internet Connection
and click Save. The
18