Unpacking The Dishwasher - Russell Hobbs RHDW3-M Instruction Manual

Unpacking the appliance
1. Remove the appliance from all packaging and check that the product has not been damaged
during transportation. If it has been damaged, contact the manufacturer or the retailer and
do not proceed any further with the installation process. Below are key areas to check:
• A misaligned door
• Damage to the door
• Dents or holes in side panels and the top panel.
• Dents in the inside
• If you can see any damage do not use the dishwasher
Before using your dishwasher for the first time:
Before using the dishwasher for the first time you must complete the following, as failure to do
so will invalidate the guarantee:
1. Connection to the water and electricity supplies should only be performed by a qualified
technician.
2. Set the water softener
3. Add 1.5Kg dishwasher salt and then fully fill the salt container with water
4. Fill the rinse aid dispenser
5. Fill in the detergent dispenser
8