Do you have a question about the RHDW14SS and is the answer not in the manual?
Questions and answers
John
March 12, 2025
Why do my russell hobbs rhdw14ss machine fill up the water in the system then drain it and after that flash the rapid ligh ? What is a solution to this problem ?
1 comments:
Mr. Anderson
March 12, 2025
The Russell Hobbs RHDW14SS machine fills with water and then drains, followed by the rapid light flashing, due to one of the following causes:
1. The faucet is not opened. 2. Water intake is restricted. 3. Water pressure is too low. 4. The inlet time is too long.
Solution: - Ensure the faucet is fully opened. - Check for any blockages or restrictions in the water intake. - Verify that the water pressure is within the recommended range (0.04-1.0 MPa).
This answer is automatically generated
Denver Masanga
March 9, 2025
Where to put soap. Liquid and what kind of salt is needed
1 comments:
Mr. Anderson
March 9, 2025
Liquid soap should be placed in the detergent dispenser compartment. For salt, only use salt specifically designed for dishwashers. Using other types, such as table salt, can damage the water softener. The salt container is located beneath the lower basket and should be filled as explained in the manual.
Page 2
For detailed operating method read the corresponding content on the instruction manual. Switch on the appliance Press the On/Off button to switch on the appliance, Open the door. With each wash cycle. Compartment Fill the detergent dispenser For programmes with pre-wash only. (Follow the user instructions!) Check the rinse aid level Electric indicator on control panel (if provided).
Page 3
Dear Customer, This appliance is in tended to be used in household and similar applications such as: Control Panel...........3 -staff kitch en areas in shop s, offices and other Dishwasher Features........3 working environme nts; -farm hous es; -by clients in hotels, motels and othe r residential type environments;...
Page 4
When using your dishwasher, follow the precautions listed below: This appliance must be grounded. In the event of a Improper connection of the equipment-grounding malfunction or breakdown, grounding will reduce conductor can result in the risk of an electric shock. the risk of an electric shock by providing a path of Check with a qualified electrician or service least resistance of electric current.
Page 5
Dispo se of the dishwasher packaging material correctly. All pa ckaging materials ca n be recycled. Plastic parts are marked with the standard international abbreviations: for polyethylene, e .g. sheet wrapping material for polysty rene, e.g. padding material po lyoxymethylene, e.g. pla stic clips polypropylene, e.g.
Page 6
To get the best performance from your dishwasher, read all operating instructions before using it for the first time. 1.On/Off Button: To turn on/off the power supply. 6.Power ind icator: To show when the power on 2. Program Button : To Press th e bu tton to select a 7.Program indic ators: to show which program wash Program.
Before using your dishwasher for the first time: Set the water softener Add 1.5Kg dishwasher salt and then full fill the salt container with water Fill the rinse aid dispenser Fill in detergent The water softener must be set manually, using the water hardness dial. The water softener is designed to remove minerals and salts from the water, which would have a detrimental or adverse effect on the operation of the appliance.
Always use the salt intended for use with dishwasher. The salt contain er is located beneath the lower basket and should be fill ed as explained in t he foll owing: Attention! Only use salt spe cif ically desi gne d for t he use i n dishwashers! Every other type of salt not speci fically de sig ned fo r the u se in a d ishwasher, espe cially table salt, will damage the w ater sof tener.
When to Refill the Rinse Aid Dispenser If there is no rinse-aid warning light in the control panel, you can estimate the amount from the colour " " of the optical level indicator C located next to the cap. When th e rinse-aid c ontainer is full, the whole indicator will be dark .As the rinse -aid diminishes, the size of the dark dot decreases.
Detergents There are 3 sorts of d etergents 1.With phosphate and with ch lorine 2.With phosphate and without chlorine 3.Without phosphate and without chlorine Normally new pulverised detergent is with out phosphate. Thus the water softener function of phosphate is not given. In this case we recommend to fill salt in the salt con taine r even when °...
Fill in Detergent Fill the detergent dispenser with detergent. The marking indicate s the dosing levels , as illustrate d on the righ t: The place of main wash cycle deterg ent placed. The place of pre-wash cycle deterge nt placed. Plea se o bserve the manufacturers dosing and storage Recommendations as stated on the detergent pac kaging.
Page 12
Consider buying utensils which are identified as dishwasher-proof. Use a mild detergent that is described as 'kind to dishes'. If necessary, seek further information from the detergent manufacturers. For particular items, select a program with as low a temperature as possible. To prevent damage, do not take gla ss a nd c utlery out of the dishwasher immediately after the programme h as ended.
The u pper basket is designed to hold more delicate The u pper basket is designed to hold more delicate We suggest that you place large items and the most We suggest that you place large items and the most and lighter dishware such as glasses, coffee and and lighter dishware such as glasses, coffee and difficult to clea n ite ms are to be placed into the lo wer...
Page 14
Means: need to fill rinse into the Rinse-Aid Dispenser. ℃ Pre-wash(50 ℃ Wash (65 For heaviest soiled crocker y, 5/25g Intensive Rinse 、 1.45 and normally soiled pots 3in1 、 Rinse pans dishes etc with dried ℃ Rinse(55 ) on soiling. Drying ℃...
When you press the Start/Pause button to pause during washing, the running indicator will stop blinking and the dishwasher will mooing every minute unless you press the Start/Pause button to start. Premise: A cycle that is underway can on ly be modified if it has only been running for a short time. Otherwise, the detergent may have already be en released, a nd the appliance may have already drained the wash water.
The filter prevents larger remnants of food or other objects from getting inside the pum. The residues may block the filter, in this case they must be removed. The filter system consists of a coarse filter,a flat (Main filter) And a microfilter(Fine filter). Main filter Fo od and soil particles trap ped in this filter are pulverized by a specia l jet on the lower spray arm and washed down to drain.
Remarks: - Inspect the filters for blo cking a fter e very time the dishwa sher has been used. - By unscrewing the coarse filter, you can remove the filter system. Re move any foo d remna nts and clean the filters under running water. The entire filter assembly should be cleaned once a week.
Page 18
When not in Use for a LongTime After Every Wash It is recommend that you run a was h cy cle with the After every wash, turn off the water supply to the dishwasher empty an d the n remove the plug from the appliance and leave the door slightly open so that socket, turn off the wa ter supply and leave the door of moisture and odours are not trapped inside.
Page 19
Improper connection of the equipment earthing conductor can result in the risk of an for personal safety: electric shock. DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE. Check with a qualified electrician or service representative if you are in doubt whether the DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE EARTHING appliance is properly earthed.
How to Drain Excess Water From Hoses If the sink is 1000 higher from the floor, the excess water in hoses cann ot be drained dire ctly into the sink. It will be necessary to drain excess water from hoses into a bo wl o r suitable container that is held outside and lower th an the sink.
Page 21
Fuse blown, or the Replace fuse or reset circuit breaker. Remove any other circuit breaker acted appliances sharing the same circuit with the dishwasher Make sure the dishwasher is turned on and the door is Power supply is not turned on closed securely.
Page 22
The dishes were not See notes in " Loading the Dishwasher Baskets ". loaded correctly. The programme was Select a more intensive programme. not powerful enough. See" Wash Cycle Table . " Not enough detergent Use more detergent, or change your detergent. was dispensed.
Page 23
If overflow occurs, turn off the main water supply before calling a service. If there is water in the base pan because of an overfill or small leak, the water should be removed before restarting the dishwasher. Height : 845mm Width : 598 mm (with the door closed)
Need help?
Do you have a question about the RHDW14SS and is the answer not in the manual?
Questions and answers
Why do my russell hobbs rhdw14ss machine fill up the water in the system then drain it and after that flash the rapid ligh ? What is a solution to this problem ?
The Russell Hobbs RHDW14SS machine fills with water and then drains, followed by the rapid light flashing, due to one of the following causes:
1. The faucet is not opened.
2. Water intake is restricted.
3. Water pressure is too low.
4. The inlet time is too long.
Solution:
- Ensure the faucet is fully opened.
- Check for any blockages or restrictions in the water intake.
- Verify that the water pressure is within the recommended range (0.04-1.0 MPa).
This answer is automatically generated
Where to put soap. Liquid and what kind of salt is needed
Liquid soap should be placed in the detergent dispenser compartment. For salt, only use salt specifically designed for dishwashers. Using other types, such as table salt, can damage the water softener. The salt container is located beneath the lower basket and should be filled as explained in the manual.
This answer is automatically generated