Fisher & Paykel RS2474S3RH Installation Manual page 26

1
2
3
4
26
DOOR PANEL PREP
STAINLESS STEEL PANEL
Determine the panel orientation
based on the hinge and handle
positions. Red labels indicate left hinge
installations, blue labels indicate right
hinge installations.
Remove the top cover using a powered
driver. Set aside.
Remove both washers and nuts and set
aside. Lift the panel brackets outwards
to remove.
Determine the panel orientation
based on the hinge and handle
positions. Red labels indicate left hinge
installations, blue labels indicate right
hinge installations.
5
6
7
8
Remove all blue tape from the panel.
Align side brackets to the pre-drilled
holes based on your hinge orientation.
Red labels indicate left hinge
installations, blue labels indicate right
hinge installations.
Using the screws supplied in the panel
kit, secure the door panel bracket using
seven screws.
Secure the side brackets using two
screws per bracket from the supplied
panel kit. Ensure side brackets are
fitted tightly and the fasteners are
secured straight.
Plug the unused holes in the panel using
the remaining screws from the panel kit.