Table of Contents
Advertisement
1
2
3
4
SERVICE CONNECTIONS
INSIDE ALCOVE
Route the hose from rear of product
through to front corner.
Remove the cap from the valve before
connecting the hose and tighten.
Connect to tap and turn on. If water is
running, check for leaks.
If required, wrap a thread around the
hose and power cord to bring any slack
inside the plinth and reduce the risk of
them tangling behind the product.
5
6
Connect to outlet and turn power on.
Push product into alcove. Push in until
the gauges touch the alcove end. Ensure
hose doesn't bend or kink and that the
power cord is not trapped.
23
Advertisement
Table of Contents
