Table of Contents
Advertisement
1
2
3
4
DOOR PANEL PREP
CUSTOM PANEL
Recheck door panel size and
specifications ensuring all bracket
locations have been marked. Refer to
page 14 for details.
Remove the top cover. Set aside.
Remove both washers and nuts and set
aside. Lift the panel brackets upwards
to remove.
Align the centre door panel bracket to
panel ensuring the 'V' in bracket is to sit
on the centreline.
5
6
7
8
Align the side brackets to panel.
Install kit F
Using the screws supplied in the install
kit, secure the door panel bracket using
seven screws.
Secure the side brackets using two
screws per bracket. Ensure side brackets
are fitted tightly and the fasteners are
secured straight.
Secure the handle to the panels using
4xM5x25 hex screws per handle.
Ensure handle fixings do not interfere
with side brackets.
25
Advertisement
Table of Contents
