Table of Contents
Advertisement
1
2
3
4
22
SERVICE CONNECTIONS
OUTSIDE ALCOVE
Route the hose from rear of product
through to front corner.
Remove the cap from the valve before
connecting the hose and tighten.
If required, wrap a thread around the
hose and power cord to bring any slack
inside the plinth and reduce the risk of
them tangling behind the product.
Push product into alcove while pulling
the hose and power cord. Ensure the
gauges touch the alcove end, the
hose doesn't kink and the power cord
remains free and untangled.
5
Connect to tap and turn on. If water is
running, check for leaks.
Connect to outlet and turn power on.
Advertisement
Table of Contents
