Table of Contents
Advertisement
1
2
3
4
HINGE SWAP (OPTIONAL)
Open the door and remove the door
shelves. Loosen the hinge screws
using the supplied Torx T25 driver.
Slide the door out and place onto a
protected surface.
Carefully remove hinges from door and
set aside.
Remove top cover and set aside.
Install kit D
Push on the edge of the outside plates,
lift out and swap to the other side.
Use a flathead screwdriver to remove
the inside plates. Move to the other
side ensuring the rounded corners face
the inside.
5
6
7
8
Check plates are positioned correctly.
Swap hinges as illustrated. Ensure
base of hinge is parallel and
tightened securely.
Refit top cover.
Swap alcove bracket with the hinge
bracket. Secure using 3 screws at the
top of the cabinet.
Slot the door back onto the screws
and tighten using a torx key to tightly
secure. Refit the door shelves.
19
Advertisement
Table of Contents
