Specifications; Intended Use; Power Supply - Makita RP1803F Instruction Manual

SPECIFICATIONS

Model:
Collet chuck capacity
Plunge capacity
No load speed
Overall height
Net weight
Safety class
Lamp
Speed adjusting dial
Electric brake
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014
Symbols
The followings show the symbols which may be used for the equip-
ment. Be sure that you understand their meaning before use.
Read instruction manual.
Wear safety glasses.
DOUBLE INSULATION
Only for EU countries
Due to the presence of hazardous compo-
nents in the equipment, used electrical and
electronic equipment may have a negative
impact on the environment and human health.
Do not dispose of electrical and electronic
appliances with household waste!
In accordance with the European Directive
on waste electrical and electronic equipment
and its adaptation to national law, used
electrical and electronic equipment should
be collected separately and delivered to
a separate collection point for municipal
waste, operating in accordance with the
environmental protection regulations.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.

Intended use

The tool is intended for flush trimming and profiling of
wood, plastic and similar materials.

Power supply

The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
RP1802 RP1802F RP1803
-1
23,000 min
312 mm
-
-
-
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-17:
Model RP1802
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model RP1802F
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model RP1803
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model RP1803F
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model RP2302FC
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model RP2303FC
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
2 ENGLISH
RP1803F RP2302FC RP2303FC
12 mm or 1/2"
0 - 70 mm
-1
22,000 min 9,000 - 23,000 min
327 mm
6.2 kg
/II
-
-
) : 85 dB(A)
pA
) : 96 dB (A)
WA
) : 85 dB(A)
pA
) : 96 dB (A)
WA
) : 85 dB(A)
pA
) : 96 dB (A)
WA
) : 85 dB(A)
pA
) : 96 dB (A)
WA
) : 88 dB(A)
pA
) : 99 dB (A)
WA
) : 88 dB(A)
pA
) : 99 dB (A)
WA
-1