Empty The Drain Pump And Clean - Bosch WNG24440 Instructions For Use And Installation

de
Clean and maintain
Empty and clean the drain
pump
1. Close the tap.
2. Switch off the device.
3. Disconnect the device's power plug
from the mains.
4th Open the service flap.
5. Remove the service flap.
6th Slide a suitable container under the
service opening.
52
7th Take the drainage hose out of the
holder.
8th. Remove the cap and allow the lye to
drain into a suitable container.
9. Press on the cap.
10. Insert the drainage hose into the
holder.