Carrier 50FF 020-093 Installation, Operation And Maintenance Instructions page 9

5 - HANDLING
Important: The centre of gravity is not necessarily in the middle of the unit and the forces applied to the slings are not always identical.
Please consult the weight and the centre of gravity of each model stated in paragraph 7.6.
Confi gurations 1, 2, 3, 4, 6 and 7
A
Confi gurations 5 and 8
A B
50FF/FC Assemblies
020 / 028 B1, B2, BF, B3, BX, BP, BA, BT, BB, BW
037 / 040 / 045 / 047 B1, B2, BF, B3, BX, BP, BA, BT, BB, BW
052 / 058 / 062 B1, B2, BF, B3, BX, BP, BT, BW
052 / 058 / 062 R1, R2, RP, RW
052 / 058 / 062 BA, BB
070 / 074 / 086 / 093 / 099
B1, B2, BF, B3, BX, BP, BT, BW
070 / 074 / 086 / 093 R1, R2, RP, RW
070 / 074 / 086 / 093 / 099 BA, BB
After the placing of the unit, it is recommended to remove the grips as they can be a hindrance for maintenance. The grips are fi xed
to the beams using M10 screws (hex. key 17). Put the grips back in case of unit transport (tightening torque of screws 25 Nm).
See detail A
B C
See detail A
C D
Confi guration
Important: all rigging points must be used
3000
3000
No. riggings Unit
points x width
beam (mm)
1 2 1750
2 2 1750
3 2 2200
4 2 2200
5 3 2200
6 2 2200
7 2 2200
8 3 2200
Detail A
Expander
Sling
Detail A
Expander
Sling
Stretcher
Distance between riggings points
Beam
(mm)
length
(mm)
A B C
2215 300 1600 315
2215 300 1600 315
2985 732,5 1520 732,5
2985 732,5 1520 732,5
2985 732,5 665 855
3639 779,5 2130 729,5
3639 779,5 2130 729,5
3639 779,5 995 1135
D
-
-
-
-
732,5
-
-
729,5
9