Transport; Receipt Of Goods; Unit Identifi Cation; Handling - Carrier 50FF 020-093 Installation, Operation And Maintenance Instructions

Package rooftop units
Table of Contents

Advertisement

4 - TRANSPORT

4.1 - Transport
Caution: If the unit contains refrigerant R-454B (A2L
fluid) specific transport safety standards must be
complied with:
■ Road transport: UN 3358 Refrigerating machines, containing
fl ammable, non-toxic, liquefi ed gas.
Transport through the Eurotunnel and through tunnels with
category D and E is not permitted.
■ Maritime transport: IMDG (International Maritime Dangerous
Goods) code: DS 291.
■ Air transport: not permitted.
The container must be identifi ed according to UN 3358.
Do not approach the container or truck in the presence of an open
fl ame, an electrical power source, a mobile phone, or any other
heat source.
Important: the type of refrigerant included in the unit can be
consulted on the name plate, see section 4.3.

4.2 - Receipt of goods

At the time of receipt, the condition of the material must be
reviewed.
Check that the unit and the accessories have not been damaged
during transport and that no parts are missing. If equipment has
been damaged, or there is a shortfall in delivery, notify accordingly.
it is necessary to check on the name plate that this is the model
ordered.
Important: The serial number refl ected in the name plate
must be used in all correspondence regarding the unit.
4.3 - Unit identifi cation
Markings (name plate, punch marks, labels) must remain visible.
They must not be altered, removed or modifi ed.

5 - HANDLING

These machines must be unloaded and positioned by
a specialist handling company using the appropriate,
standardised tools.
The unit must be handled with care to avoid transport damage.
Do not remove the protective packaging and the transport guards
until the unit is in its fi nal location.
Important: The transport of two stacked units is allowed, but not
the simultaneous handling of both units.
Before handling, check that the path leading to the installation
location is accessible and free from obstacles.
Optional modules, such us the fresh air housing (B3, BX, BP, BA,
BW, RP and RW assemblies) and the heat recovery wheel (BW
and RW assemblies), are supplied disassembled with the unit,
for installation on site.
It is always mandatory to grasp the unit by the points intended for
that purpose, as described in this chapter.
Any handling of the unit by other means or by gripping points
diff erent from those described here may be dangerous for both
the unit and the personnel who are carrying out the discharging
or transport work.
Name plate
All units bear, legibly and indelibly, a name plate located in a prime
space, as appears in the attached image:
Año\An.Year
Ref\Reference
1
2
Producto\Product\Produit
Ref. Produit\Item Nbr
5
Tension\Voltage
Kit Elec.
8
9
Refrigerant/GWP(PCA)
Refrig.KG (Fábrica\Factory\Usine)/Co2 Teq.
11
12
PSmax(AP\HP) PSmax(BP\LP)
Temp. Max./ IP
13
14
CARRIER SCS Route de Thil 01120,
MONTLUEL, France
Contient des gaz à effet de serre fluorés \ Contains fluorinated greenhouse gases regulated by the Kyoto protocol
Contiene gases fluorados de efecto invernadero regulados por el protocolo de Kyoto
Legend
1
Year of manufacture
2
Commercial product name
3
Serial number
4
Description of the product
5
Purchase order number
6
Sales order number
7
Work order number
8
Power supply
9
Power output of the auxiliary electrical heaters kit (optional) (kW)
10
Maximum absorbed current under full load (A) ( including the
electrical kit)
11
Type of refrigerant: R-410A or R-454B
12
Refrigerant content (kg) and Environment impact (CO
13
Maximum service pressure in the high pressure side
(R-410A = 42 bar/ R-454B = 40,5 bar)
14
Maximum service pressure in the low pressure side
(R-410A = 24 bar/ R-454B = 40,5 bar)
15
Maximum operating temperature (refer to "Operation limits")
Maximum shipment and storage temperature: +50ºC
Electrical protection rating: IP54
16
Operation weight (kg) (empty weight + fl uid + refrigerant)
Fresh air housing
Unit
Always check the weight of the unit and verify that the
discharging method used is approved for handling that
weight.
No Serie\serial Nbr.
3
4
6
7
Max.Intensidad\Intensité\Current
10
Peso\Poids\Weight
16
15
0094
Teq.)
2
Heat recovery wheel
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

50fc 020-099

Table of Contents