Dymo LetraTag LT-100H Quick Start Guide
About Your New Label Maker
With your new DYMO LetraTag® label maker, you can create a wide variety of high-quality, self-adhesive labels. The label maker uses DYMO LetraTag (LT) 1/2 inch (12 mm) label cassettes. LT label cassettes are available in a variety of colors and materials such as paper, plastic, metallic, and iron-on.
Visit www.dymo.com for a complete User Guide, and for information on obtaining labels for your label maker.
Product Registration
Visit www.dymo.com/registration to register your label maker online.
Getting Started
Follow the instructions in this section to print your first label.
Inserting the Batteries
- Remove the battery compartment cover.
- Insert the batteries following the polarity markings (+ and –).
- Replace the cover.
Remove the batteries if the label maker will not be used for a long period of time.
Selecting a Language
- Press .
- Use the up or down arrow key to select Language and press .
- Use the up or down arrow key to select the language you want and press .
Setting the Date and Time
- Press .
- Select Set Date and press . The default date is displayed.
- Use the left or right arrow key to move the cursor over each setting (month, day, and year) and use the up or down arrow key to increase or decrease the value.
- When finished, press .The default time is displayed.
- Use the left or right arrow key to move the cursor over each setting (hours and minutes) and use the up or down arrow key to increase or decrease the value.
- When finished, press .
Printing Your First Label
- Enter text to create a simple label.
- Press .
- Press the cutter button to cut the label.
- Remove the paper backing from the label to expose the adhesive, and then attach the label.
Getting to Know Your Label Maker
Adding Symbols
- Press , select Symbols, and press . The first row of symbols shown in the table appears in the display.
- Use the arrow keys to move to the desired symbol. The left and right arrows move horizontally along a row of symbols. The up and down arrow keys scroll vertically through the rows of symbols.
- When you locate the symbol, press to add the symbol to your label.
Adding International Characters
The label maker supports the extended Latin character set using RACE technology. Similar to using a mobile phone keypad, when you hold down a letter key for longer than one second, you will scroll through variations on that letter. To insert the character, release the key when the desired character appears.
Special Characters and Symbols
The label maker supports the symbols shown below.
Previewing Your Label
- Press .
- Select Preview and press .
Clearing the Display
- Press to clear all label text and formatting from the display.
Storing Label Text
You can store up to nine specific labels you use frequently.
- Press .
- Select a memory location and press .
Recalling Stored Labels
- Press . The first memory location is displayed similar to storing a label or format.
- Select a label to recall and press .
To clear a memory field, first recall a label and then press .
What to do if your product is defective?
DYMO offers you the following service options:
- DYMO Web site: In most situations a visit to www.dymo.com will give you the right assistance. In the Customer Support area, you will find information about your DYMO product, such as Frequently Asked Questions and solutions to known problems. The User Guide also gives you additional information.
- Dealer: Your DYMO dealer can help you to determine the exact nature of the problem and assist you further.
- DYMO Help Desk: You can also contact the DYMO Help Desk where an associate will help you to determine the exact nature of the problem and advise you what to do next:
UK |
020 3564 8354 |
AUS |
1 800 633 868 |
NZ |
0800 396 669 |
Intl |
+44 203 564 8356 |
- Repair Center: You can send your defective product to a DYMO repair center (please see the above-mentioned conditions 1 and 2 on how to replace a defective product). The address of your nearest DYMO repair center can be found at www.dymo.com or you can contact the DYMO Help Desk.
Special Provisions for Australia
The following provisions shall apply in addition to the above warranty if the sale of the DYMO product occurred in Australia:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for major failure and compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Any repair or replacement will be at DYMO's expense and free of charge to you.
Refer to www.dymo.com to find your local service center contact information.
Register for 2 + 1 year warranty
Register your new DYMO product and get 1-year additional warranty.
As a registered user you also receive:
- Technical support from experts
- Helpful tips and tricks on the use of your product
- Special offers and new product announcements
Register today and soon you'll receive your product's extended warranty certificate. Go to www.dymo.com/register
2-Year Warranty for Your DYMO Product
Your electronic DYMO product is sold with a 2-year warranty from the date of purchase against defects in material and workmanship. DYMO will repair or replace your product free of charge on the following conditions:
- Products returned under this warranty must be accompanied by a description of the defect together with a copy of the product's proof of purchase and your full contact and delivery details: name, telephone, complete address – street, house number, postal code, city, country.
- Products returned to DYMO must be adequately packaged. DYMO will accept no liability for goods lost or damaged in transit from the customer.
- Products must have been used strictly in accordance with operating instructions supplied. DYMO will have no liability for defects caused by accident, misuse, alteration or neglect.
- DYMO accepts no liability for any consequential loss, damage or expense of any kind resulting from the machines or accessories or the use thereof, save that liability for death or bodily injury caused by such products is not excluded.
- DYMO label printers are designed for use only with DYMO-branded labels. This warranty does not cover any malfunction or damage caused by the use of third-party labels.
- This warranty does not affect your statutory rights as a consumer.
Documents / ResourcesDownload manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Dymo LetraTag LT-100H Quick Start Guide
Need Assistance?
Do you have a question about the LetraTag LT-100H that isn't answered in the manual? Leave your question here.