JBL TUNE 115BT - Wireless In-Ear Headphones Quick Start Guide

WHAT'S IN THE BOX

HOW TO WEAR

1. Select the right ear tips
   Mix and match for a perfect fit and audio performance
   
   
2. Attach ear tip
   
   
3. Wear behind the neck
   
   
4. Use the magnets
   

POWER ON & CONNECT

1. Power on and enter pairing mode automatically
2. Choose "JBL TUNE115BT" to connect

BUTTON COMMAND

1. To switch music source, pause the music on the current device and select play on the 2nd device
2. Phone call will always take priority.
3. If one device goes out of bluetooth range or powers off, you may need to manually reconnect the remaining device.
4. SELECT "forget this device" on your bluetooth devices to disconnect multi-point.

CHARGING

LED BEHAVIORS

TECH SPEC

Driver Size: 8.6 mm Dynamic Driver
Frequency Response: 20 Hz – 20 kHz
Sensitivity: 102dB SPL@1kHz 1mW
Microphone Sensitivity: 25dBV/Pa @1kHz
Impedance: 16 ohm
Bluetooth transmitted power: 0-4 dbm
Bluetooth transmitted modulation: GFSK/DQPSK/8DPSK
Bluetooth frequency: 2.402 GHz - 2.480 GHx
Bluetooth profile version: HFP V1.6,HSP V1.2,VRCP V1.5, A2DP V1.2
Bluetooth version: 4.2
HEADSET BATTERY TYPE: LITHIUM-ION BATTERY (3.7 V/160 MAH)
Power Supply: 5 V 1 A
Charging time: 2 hrs
Music playtime with BT on: 8 hrs
Weight: 19.02 g

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download JBL TUNE 115BT - Wireless In-Ear Headphones Quick Start Guide