JBL Tune 560BT - On-Ear Headphones Manual

What's in the box

TUNE560BT

Charging cable

Warranty Card, Warning Card, Safety sheet and QSG

Overview

Buttons & LEDs

Charging

Bluetooth^® connection

1. Turn on/off the headphone
   
2. If connecting for the first time, the headphone will enter paring mode automatically after it is powered on.
3. Connect to Bluetooth device
   

Music control

Phone call

Voice assistant

Seamlessly switch between devices

1. Pair and connect the headphone with the 1^st device. (see Section Bluetooth Connection)
2. Pair and connect the headphone with the 2^nd Bluetooth device
   
3. Connect to Bluetooth device
   

Items to note:

1. Maximum 2 devices can be connected simultaneously
2. To switch music source, pause the music on the current device and select play on the 2^nd device.
3. Phone call will always take priority.
4. If one device goes out of Bluetooth range or powers off, you may need to manually reconnect the remaining device. See Section 7 Step 3.

LED behaviour

LED Status	Headphone mode
On	Power on
On	Power off
Fast	BT Pairing
On	BT Connected
Slow	Low Battery
On	Charging in Progress
Off	Charging Complete