Nedis SPBT2000 Series, SPBT2001 Series Quick Guide

Table of Contents

Description

Description - Part 1
Description - Part 2

1.	On/off switch	Set the switch to the on position to switch on the device. Set the switch to the off position to switch off the device.
2.	Mode button (SPBT2001xx only)	Press and hold the button to select the mode: Bluetooth/AUX/Memory card.
3.	Play/pause button Hands-free button Bluetooth button	Press the button to play or pause the track. Press the button to answer or end the call. Double-press the button to reject the call. Press and hold the button to start Bluetooth pairing or disconnect Bluetooth.
4.	Volume + button Next button	Press and hold the button to increase the volume. SD card/Bluetooth mode: Press the button to select the next track.
5.	Volume - button Previous button	Press and hold the button to decrease the volume. SD card/Bluetooth mode: Press the button to select the previous track.
6.	USB port	To charge the device, connect the USB cable to the USB port of the device and to an USB adapter or computer. The red charging indicator comes on. The device starts charging. When the charging process is completed, the red charging indicator goes off.
7.	Memory card slot (SD)	Insert the SD card (max. 32GB) with MP3 usic files. The device automatically starts to play the MP3 music files.
8.	AUX input	Connect an AUX cable to the AUX input of the device and the audio device. The red indicator comes on.

Switch on the device.
Activate Bluetooth on your Bluetooth device.
Search for new devices on the Bluetooth device.
Select the device: "SPBT2000" / "SPBT2001". If a password is required, enter "0000".
The Bluetooth device will confirm when the pairing is completed.

Read the manual carefully before use. Keep the manual for future reference.
The manufacturer is not liable for consequential damages or for damages to property or persons caused by nonobservance of the safety instructions and improper use of the device.
Only use the device for its intended purposes. Do not use the device for other purposes than described in the manual.
Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.
The device is suitable for indoor use only. Do not use the device outdoors.
The device is suitable for domestic use only. Do not use the device for commercial purposes.
Do not use the device in locations with high humidity, such as bathrooms and swimming pools.
Do not use the device near bathtubs, showers, basins or other vessels containing water.
Do not use a timer or a separate remote-control system that switches on the device automatically.
Do not cover the device.
Place the device on a stable, flat surface.
Keep the device away from flammable objects.

RISK OF ELECTRIC SHOCK
DO NOT OPEN

To reduce risk of electric shock, this product should only be opened by an authorized technician when service is required.
Disconnect the product from the mains and other equipment if a problem should occur.
Do not use the device if the mains cable or mains plug is damaged or defective. If the mains cable or mains plug is damaged or defective, it must be replaced by the manufacturer or an authorised repair agent.
Before use, always check that the mains voltage is the same as the voltage on the rating plate of the device.
Do not move the device by pulling the mains cable. Make sure that the mains cable cannot become entangled.
Do not immerse the device, the mains cable or the mains plug in water or other liquids.
Do not leave the device unattended while the mains plug is connected to the mains supply.
Do not use an extension cable.

Before cleaning or maintenance, always switch off the device, remove the mains plug from the wall socket and wait until the device has cooled down.
Do not use cleaning solvents or abrasives.
Do not clean the inside of the device.
Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
Do not immerse the device in water or other liquids.
Clean the outside of the device using a soft, damp cloth. Thoroughly dry the device with a clean, dry cloth.
Clean the ventilation openings using a soft brush.