Rear Wheel Replacement - Toro 21462 Service Manual

Rear Wheel Replacement

Rear Wheel Removal
Drive System: Service and Repairs
1. Park the machine on a level surface, stop the engine and wait for all moving
parts to stop.
2. Models equipped with the 60v powerhead, remove the harness from
powerhead.
3. Models equipped with electric start only, remove the 2 (M4.2 x 2.0)
screws securing the battery cover. Remove the battery cover and foam pad.
Disconnect the battery by removing the negative cable first, then the positive
cable from the battery.
4. Remove the grass bagger assembly if attached.
5. Using ½ inch socket wrench, remove the (3/8–16 inch) wheel bolt securing
the LH wheel to the LH pivot arm. Remove the wheel and gear cover. Repeat
on the RH side of the unit.
g352317
6. Using a snap ring pliers, remove the snap ring from the LH transmission axle
shaft. Repeat on the RH side of the unit.
g352318
Figure 135
Figure 136
Page 7–10 22 Inch AWD/RWD Steel Deck Walk Power
Mower Service Manual
3445-579 Rev A