Toro 21462 Service Manual page 94

Rear Height-of-Cut Assembly (continued)
Rear Height-of-Cut Installation
Deck: Service and Repairs
4. Using a 1 ¼ inch socket or wrench, rotate the bushing retainer clockwise to
install the bushing retainer to the rear pivot arm. Torque the bushing retainer
to 7.9 ± 9 N • m (70 ± 80 in-lbs).
g359619
1. Align the holes on LH the height-of-cut plate to the LH deck. Repeat on
the RH side of the unit.
g370908
2. Install the LH height-of-cut plate assembly to the deck, secure with a (1/4–10
inch) carriage screw and lock nut. Torque the nut to 19.2 ± 3.39 N • m (170
± 30 in-lbs). Repeat on the RH side of the unit.
Figure 109
Figure 110
Page 6–16 22 Inch AWD/RWD Steel Deck Walk Power
Mower Service Manual
3445-579 Rev A