Table of Contents
Advertisement
26 | Drystar 5301, Drystar 5302 | Introduction
Labels
Always take into account the markings provided on the inside and outside of
the printer. A brief overview of these markings and their meaning is given
below.
2831E EN 20161128 1410
Safety warning, indicating that the user manuals of the printer
should be consulted before making any connections to other
equipment. The use of accessory equipment not complying with
the equivalent safety requirements of this printer may lead to a
reduced level of safety of the resulting system. Consideration
relating to the choice of accessory equipment shall include:
• Use of the accessory equipment in the patient vicinity,
• Evidence that the safety certification of the accessory
equipment has been performed in accordance with the
appropriate IEC 601-1 and IEC 601-1-2 harmonized national
standard.
In addition all configurations must comply with the medical
electrical systems standard IEC 601-1-2. The party that makes
the connections acts as system configurator and is responsible
for complying with the systems standard.
If required contact your local service organization.
Caution hot:
Keep hands clear from the thermal print head.
In order to reduce the risk of electric shock, do not remove any
covers.
Supplementary protective earth connector:
Provides a connection between the printer and the potential
equalization busbar of the electrical system as found in medical
environments. This plug should never be unplugged before the
power is turned off and the power plug has been removed.
It is recommended to use the supplementary protective earth
connection as additional safety measure.
Intergrounding connector:
Provides a connection between the printer and other equipment
which might exhibit minor ground potential differences. These
differences may degrade the quality of communication between
different equipment. Never remove connections to this terminal.
Protective earth (ground):
Advertisement
Table of Contents
