MSI MS-7043 User Manual page 21

FSB200: [By SPD], [DDR 266 (3:2)], [DDR 333 (6:5)], [DDR 400 (1:1)], [DDR 433], [DDR 450],
[DDR 466], [DDR 500]
MSI Reminds You...
The value plus a ratio (CPU: DDR) with parentheses means the non-synchronous overclocking.
DRAM Frequency
This setting shows the current frequency of DDR DRAM (read only).
AGP Frequency (MHz)
This item is used to configure the AGP frequency.
CPU Voltage Adjust
The setting allows you to adjust the CPU Vcore voltage, which depends on the CPU.
AGP Voltage Adjust (V)
AGP voltage is adjustable in the field, allowing you to increase the performance of your AGP display
card when overclocking, but the stability may be affected.
DDR Voltage Adjust (V)
This setting is used to adjust the DRAM core voltage (Vcore), making overclocking possible.
North Bridge/South Bridge Voltage (V)
These two items configure the voltage of the North Bridge and the South Bridge for overclocking
purposes.
MSI Reminds You...
The settings shown in different color in CPU Voltage, DDR Voltage, AGP Voltage, and North Bridge
/South Bridge Voltage help to verify if your setting is proper for your system.
White: Safe setting.
Yellow: High performance setting.
Red: Not recommended setting and the system may be unstable.
Changing CPU/DDR/AGP/North Bridge/South Bridge Voltage may result in system instability;
therefore, it is NOT recommended to change the default settings for long-term usage.
For complete BIOS setup information, please visit MSI website at http://www.msi.com.tw .
17