MSI MS-7043 User Manual page 20

developed CoreCellTM Technology. It is designed to detect the load balance of CPU while running
programs, and to adjust the best CPU frequency automatically. When the motherboard detects that the
CPU is running programs, it will speed up CPU automatically to make the program run smoothly and
faster. When the CPU is temporarily suspending or staying in the low load balance, it will restore the
default settings instead. Usually the Dynamic Overclocking Technology will be powered only when
users' PC need to run huge amount of data like 3D games or the video process, and the CPU
frequency needs to be boosted up to enhance the overall performance.
Setting options:
[Disabled]
[Private]
[Sergeant]
[Captain]
[Colonel]
[General]
[Commander] 6th level of overclocking.
MSI Reminds You...
1. Even though the Dynamic Overclocking Technology is more stable than manual overclocking,
basically, it is still risky. We suggest that users make sure that the CPU can afford to overclocking
regularly first. If you find the PC appears to be unstable or reboot incidentally, it's better to disable the
Dynamic Overclocking or to lower the level of overclocking options. By the way, if you need to conduct
overclocking manually, you also need to disable the Dynamic OverClocking first.
2. Meanwhile, there are two functions to protect user's system from crashing.
-There is a safe key "Ins" in BIOS. In case the overclocking fails, you can press "Ins" key while system
rebooting to restore to the BIOS defaults.
-If the system incidentally reboot for four times, the BIOS will also be restored to the defaults.
CPU Ratio Selection
This setting controls the multiplier that is used to determine the internal clock speed of the processor
relative to the external or motherboard clock speed.
CPU FSB Clock
This setting shows the current CPU Front Side Bus clock frequency.
DRAM Clock
Use this field to configure the clock frequency of the installed DRAM.
Setting options:
FSB100: [By SPD], [DDR 266 (3:4)], [DDR 333 (3:5)], [DDR 400 (1:2)], [DDR 433], [DDR 450],
[DDR 466], [DDR 500]
FSB133: [By SPD], [DDR 266 (1:1)], [DDR 333 (4:5)], [DDR 400 (2:3)], [DDR 433], [DDR 450],
[DDR 466], [DDR 500]
Disable Dynamic Overclocking.
1st level of overclocking.
2nd level of overclocking.
3rd level of overclocking, also the default value of "Load High Performance
Defaults".
4th level of overclocking.
5th level of overclocking.
16