Page 1
ropins Installation Guide and Users Manual...
Page 2
REGISTERING YOUR PRODUCT Please register your ZLINE appliance. Begin the simple registration process by scanning the QR code. SCAN ME By registering your appliance, you will have easy and accurate access to: • Technical Support • Warranty Service • Tracking your support inquiries •...
Page 3
With an endless selection of features and finishes, our inspiration is your reality. ZLINE is fueled by a passion for innovation; A relentless pursuit of bringing the highest end luxury designs and professional features into everyone’s homes. Because we continually strive...
Page 4
WARRANTY COVERAGE ZLINE Kitchen and Bath range products will be warrantied for one year from the original purchase date for the original purchaser of the product. This warranty covers all parts and labor for necessary repairs if any part of the product proves to be defective in materials or workmanship.
Page 5
WARRANTY WHAT IS NOT COVERED Installation or start-up, damages or problems caused by improper installation or use. 2. Improper liquid propane conversion or damage related to improper liquid propane conversion. 3. Cook top burner flame adjustments or related complaints. 4. Service by an unauthorized service providers or damage related to unauthorized service or unauthorized parts.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS WARRANTY AND SERVICE PRODUCT DIMENSIONS BEFORE INSTALLATION INSTALLATION REQUIREMENTS INSTALLATION POWER RATING & ELECTRICAL CONNECTION GAS CONNECTION GAS CONVERSION PROCEDURE INSTALLATION CHECKLIST FINAL PREPARATION ROOM VENTILATION COOKTOP COOKING MAINTAINING YOUR RANGE TROUBLESHOOTING...
IMPORTANT SAFETY INSTRUCTIONS An air curtain or other overhead range/cooktop hood, which operates by blowing downward airflow onto the range, shall not be WARNING used/installed in conjunction with this gas range. • The manufacturer will not be responsible for any damage to property or to persons caused by incorrect installation, improper use of the appliance, or failure to heed the warnings listed.
Page 8
IMPORTANT SAFETY INSTRUCTIONS • Installation of any gas-fired equipment should be made by a licensed plumber. A manual gas shut-off valve must be installed in the gas supply line ahead of the oven in the gas flow for safety and ease of service. •...
Service on all products shall be carried out by industry professionals only. For warranty service, please call customer service. REPLACEMENT PARTS Only authorized replacement parts may be used in performing service on this appliance. Replacement parts are available from ZLINE. Call 1-614-777-5004. 30“ 3.44” 21“ 36“...
BEFORE INSTALLATION • This appliance shall only be installed by an authorized professional. • The appliance shall be installed in accordance with the standards of the country where it will be installed. The installation of this appliance must conform to local codes and ordinances.
Page 11
BEFORE INSTALLATION ROOM VENTILATION An exhaust fan may be used with the appliance; in each case it shall be installed in conformity with the appropriate national and local standards. Exhaust hood operation may affect other vented appliances; in each case it shall be installed in conformity with the appropriate national and local standards.
INSTALLATION INSTALLATION ADJACENT TO KITCHEN CABINETS For the best look, the worktop should be level with the cabinet countertop. Clearances 30” 6” min 6” min 3 1/2” min 30” 3 1/2” min 36” 6 min” 6” min 3 1/2” min 36”...
INSTALLATION ATTACHING THE DROPIN To prevent liquids from accidentally leaking into the underlying storage space, the appliance is equipped with a special gasket. To apply this gasket, carefully follow the instructions in Fig. 1. Lay out the protective sealing strips along the edges of the opening in the bench top and carefully overlap the strip end.
INSTALLATION The appliance shall be connected to a single phase electric line rated at 1 10-120Vac and 60Hz frequency. The true voltage in most homes is usually between these values. ELECTRIC POWER RATING 1 10/120 Vac: 12A Max ELECTRICAL GROUNDING •...
INSTALLATION GAS CONNECTION • All gas connections must comply with national and local codes. The gas supply line (service) must be the same size or greater than the inlet line of the appliance. This range uses a ½˝ NPT inlet. Use appropriate sealant on all pipe joints that are resistant to gas.
Page 16
INSTALLATION MANUAL SHUT-OFF VALVE • This valve is not shipped with the appliance and must be provided by the installer. • The manual shut-off valve must be installed in the gas service line between the gas hook-up on the wall and the appliance inlet, in position where it can be reached quickly in the event of an emergency.
Page 17
INSTALLATION PRESSURE REGULATOR Since service pressure may fluctuate with local demand, every gas cooking appliance must be equipped with a pressure regulator on the incoming service line for safe and efficient operation. Pressure Regulator • The pressure regulator shipped with the appliance has two female threads 34”NPT.
INSTALLATION GAS CONVERSION PROCEDURE The gas conversion procedure for this range includes: 1. Pressure Regulator 2. Surface Burners 3. Flame Adjustment The conversion is not finished if all steps are not completed. Before performing the gas conversion, locate the package containing the replacement nozzles, which has a number indicating its flow diameter printed on the body.
Page 19
INSTALLATION STEP 1: PRESSURE REGULATOR The pressure regulator supplied with the appliance is a convertible type pressure regulator for use with Natural Gas at a nominal outlet pressure of 4˝ w.c. or LP gas at a nominal outlet pressure of 1 1” w.c. and it is pre-assembled from the factory to operate with one of these gas pressure as indicated in the labels affixed on the appliance, package, and instruction booklet.
Page 20
INSTALLATION STEP 2: SURFACE BURNERS To replace the nozzles of the surface burners, lift up the burners and unscrew the nozzles shipped with the range using a 7 mm (socket wrench). 2. Replace nozzles using the conversion set supplied with the range. Each nozzle has a number indicating its flow diameter printed on the body.
Page 21
INSTALLATION STEP 3: FLAME ADJUSTMENT Light one burner at a time and set it to the MINIMUM position (small flame). 2. Remove the knob. 3. The range is equipped with a safety valve. Using a small-size flathead screwdriver, locate the choke screw (see diagram below) and turn to the right or left until the burner flame is adjusted to desired minimum.
INSTALLATION INSTALLATION CHECKLIST Is the range mounted on its legs? 2. Is the back guard securely connected? 3. Have the chains been properly installed? 4. Does the clearance from the side cabinets comply with the manufacturers’ direction? 5. Is the electricity properly grounded? 6.
INSTALLATION ROOM VENTILATION The use of a gas cooking appliance generates heat and humidity in the room where it is installed. Proper ventilation in the room is needed. Make sure the kitchen is equipped with a range hood of appropriate power (400 CFM minimum). Activate the exhaust fan/range hood when possible.
Page 24
OPERATION SURFACE BURNER OPERATION - ELECTRIC IGNITION To activate the electric ignition, simply turn the control knob counter-clockwise to maximum power, then press the knob in to start the flow of gas and the ignition spark. The spark will be released at the metal tip of the white ceramic pin located on the side of the burner.
Page 25
OPERATION Be sure to set all worktop/oven/broiler burner controls to the OFF position after each use of the appliance. Maximum Flame Height Minimum Flame Height Maximum temperature setting/recommended control knob position for burner ignition. The regulating knobs should be turned in anti-clockwise direction until the small flame symbol, vice-versa for the larger flame symbol.
MAINTENANCE AND CLEANING CLEANING YOUR RANGE During cleaning operation, never move the appliance from its original installation position. Never use abrasive cleaners! Scratches on the stainless WARNING steel surfaces are permanent. Do NOT clean the range when hot! • Cleaning after Installation: Use a stainless steel cleaning product or wipe to eliminate the glue residues of the protection film after removal.
TROUBLESHOOTING RANGE PROBLEM POSSIBLE CAUSE AND/OR REMEDY Igniters are not sparking Rangetop is not connected to electrical power. Check power circuit breaker, wiring, and fuses. If all electrical components are properly installed, call customer support. Burner does not ignite Gas supply valve is in the “OFF” position or gas supply is interrupted.
Page 28
Installation Guide and User Manual 2.0.0 1-614-777-5004 contact@zlinekitchen.com www.zlinekitchen.com...