Power Amp - Panasonic SA-PT160GC Service Manual

SA-PT160GC / SA-PT160GCP / SA-PT160GCS / SA-PT160GCT / SA-PT160GS
8.3.3. Power Supply Error Code Table
Error
Diagnosis Contents
Code
F61 The abnormalities
in an output or power goes to "L" (Low) (Not during POWER
supply circuit of

POWER AMP

F76 Abnormality in the
output voltage of
stabilized power
supply
8.3.4. ECC Error Code Table
Error
Diagnosis Contents
Code
F600 Administrative
information cannot
be acquired by the
recovery error.
F601 Irregular sector ID
was demanded.
F603 KEYDET cannot be The data for decoding copyright
acquired by the
recovery error.
Description of error
In normal operation, when DCDET2
OFF condition), F61 appears on FL
Display and PCONT goes to "L" (Low).
This is due to speaker output has DC
voltage or fan is not working.
In normal operation when DCDET1 is
detected "L" (Low) for two consecutive
times, F76 is displayed on FL for 2
seconds and after that PCONT will be
turned to "L" (Low). This is due to any of
the DC voltages (+9V, +7V, -7V, +5V,
+5.3V etc.) not available.
Description of error
It becomes impossible NaviPack etc.
were done, and not to be able to
acquire necessary information in the
navigation's changing due to wound
etc. of DISC, and to have done the
reproduction transition.
It tried to access the position that did
not exist on DISC by the recording
error etc. of authoring.
protection (CSS) cannot be acquired
due to wound etc. of DISC, and it is not
possible to reproduce.
Automatic FL Display
Automatic FL Display
32
Remarks
Press [ STOP] on
main unit for next error.
Press [ STOP] on
main unit for next error.
Remarks
Press [ STOP] on
main unit for next error.
Press [ STOP] on
main unit for next error.
Press [ STOP] on
main unit for next error.