Table of Contents
Advertisement
SA-PT160GC / SA-PT160GCP / SA-PT160GCS / SA-PT160GCT / SA-PT160GS
The function of this circuitry is to prevent circuitry damage if, for example, the positive and negative speaker connection wires are
"shorted", or if speaker systems with an impedance less than the indicated rated impedance of the amplifier are used.
If this occurs, follow the procedure outlines below:
1. Turn off the power.
2. Determine the cause of the problem and correct it.
3. Turn on the power once again after one minute.
Note:
When the protection circuitry functions, the unit will not operate unless the power is first turned off and then on again.
1.4.
Safety Parts Information
Safety Parts List:
There are special components used in this equipment which are important for safety.
These parts are marked by
should be replaced with manufacturer's specified parts to prevent shock, fire or other hazards. Do not modify the original design
without permission of manufacturer.
Ref. No.
16
16
16
16
28
40
340
A2
A2
A2
in the Schematic Diagrams & Replacement Parts List. It is essential that these critical parts
Part No.
RGRX0058F-S
RGRX0058F-T
RGRX0058F-U
RGRX0058F-V
RKMX0107-K3
N0AZ6GE00006
RAE2023Z-S
K2CP2YY00001
K2CQ2CA00007
K2CT3CA00004
Table 1
Part Name & Description
REAR PANEL
REAR PANEL
REAR PANEL
REAR PANEL
TOP CABINET
SMPS MODULE
TRAVERSE UNIT
AC CORD
AC CORD
AC CORD
6
Remarks
[M] GC/GS
[M] GCS
[M] GCT
[M] GCP
[M]
[M] (RTL)
[M] (RTL)
[M] GCT
[M] GC/GCP/GCS/GS
[M] GS
Advertisement
Table of Contents
