Step 9 Remove 4 screws.
Step 10 Remove the Main P.C.B..
Caution: During assembling, ensure that the Main P.C.B. is
properly located & seated onto the Bottom Chassis.
12.12. Disassembly of D-Amp P.C.B.
• Refer to "Disassembly of Top Cabinet".
Step 1 Remove 7 screws.
Step 2 Release tabs at each side of the Rear Panel in the
direction of arrow.
Step 3 Lift up the Wire Clamper.
Step 4 Detach 3P Fan Wire at the connector (CN5401) on D-
Amp P.C.B..
Step 5 Detach 18P FFC at the connector (CN5402) on D-Amp
P.C.B..
Step 6 Detach 4P Cable at the connector (CN5400) on D-Amp
P.C.B..
56