SD Biosensor MultiCare 03MA10 User Instruction Manual page 13

Stage 4. Setting – Date
In the fourth stage, you set the Date in Date or Month.
After setting the Date Format, set the correct month or day by pressing
either the left () or right () button and select by pressing the Enter button.
Stage 5. Setting – Time Format
In the fifth stage, you set the Time Format in the Date & Time setting.
The analyzer can display the time in either 12h format or 24h format. Set
the preferred format on the display by pressing either the left () or right ()
button and select by pressing the Enter button.
Stage 6. Setting – Time
In the sixth stage, you set the Time, the current hour and minutes.
Set the hour and minute by pressing either the left () or right () button and
select by pressing the Enter button.
1) 12h Format
Sub-step 1) Set AM or PM
Sub-step 2) Set hour (1 to 12)
Sub-step 3) Set the minute (1 to 59)
15