Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for MSI MPC 651
Summary of Contents for MSI MPC 651
- Page 1 MPC 651 maximize your Digital World User’ s Guide Version 1.0...
- Page 2 Shielded interface cables and AC. power cord, if any, must be used in order to comply with the emission limits. VOIR LA NOTICE D’ INSTALLATION AVANT DE RACCORDER AU RESEAU. Assembled from tested components Complete system not tested Micro-Star International MPC 651...
- Page 3 Lithium Battery Statement CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used bat- teries according to the manufacturer’ s instructions. Macrovision Statement ® This product incorporates copyright protection technology that is protected by method claims of certain U.S.
- Page 4 Safety Instructions Always read the safety instructions carefully. Keep this User’ s Manual for future reference. Keep this equipment away from humidity. Lay this equipment on a reliable flat surface before setting it up. The openings on the enclosure are for air convection hence protects the equipment from overheating.
- Page 5 Trademarks All trademarks are the properties of their respective owners. Intel and Pentium are registered trademarks of Intel Corporation. ® ® PS/2 and OS /2 are registered trademarks of International Business Machines ® Corporation. Windows 95/98/2000/NT/XP are registered trademarks of Microsoft Corporation. ®...
-
Page 6: Table Of Contents
Introduction Chapter 1. Getting Started ---------------------------------------------------------- 1-1 1.1 Introduction ----------------------------------------------------------------- 1-2 1.2 System Specification ----------------------------------------------------- 1-4 Chapter 2. Introducing Mainboard ---------------------------------------- 2-1 2.1 Mainboard Layout --------------------------------------------------------- 2-2 2.2 CPU/Memory --------------------------------------------------------------- 2-3 Introduction to DDR SDRAM ----------------------------------------- 2-3 2.3 Power Supply --------------------------------------------------------------- 2-4 2.4 Front Panel ------------------------------------------------------------------ 2-5 IEEE 1394 Port: J1394-2 ------------------------------------------------ 2-5 IEEE 1394 Port: J1394-1 ------------------------------------------------ 2-6... - Page 7 2.7 Jumper ... 2-16 Clear CMOS Jumper: J2 ... 2-16 2.8 Slots ... 2-17 PCI Slot ... 2-17 AGP Slot ... 2-17 Chapter 3: Setting BIOS Function ... 3-1 3.1 Entering Setup ... 3-2 Control Keys ... 3-2 Getting Help ... 3-3 Main Menu ...
-
Page 8: Introduction
Getting Started Getting Started 1.1 Introduction 1.2 System Specification... -
Page 9: Introduction
Chapter 1 1.1 Introduction Unlike the traditional PC, the MPC 651 comes with a fancy design case and multimedia I/O ports for quick connection and use. Front Panel Power Switch Eject/Stop Optical SPDIF-in Mic-in USB x 2 J1394-2 Headphone J1394-1... - Page 10 Back Panel Mouse Power Jack Power Voltage Switch Serial Port VGA Port Keyboard ATTENTION!!! Check the AC power voltage switch on the back panel. Select the voltage that is appropriate to the country you are in. LAN Port Parallel Port Speak-out Optical SPDIF-out USB x 2...
-
Page 11: System Specification
Chapter 1 1.2 System Specification - MS-6760 (Proprietary F/F), 185 x 290 mm (4 layer) CPU: - Support Socket 478 for Pentium Chipset: - SiS 651 + SiS 962 Memory: - DDR 333 x 2, support memory up to 2.0GB On-Board Audio: - AC’... - Page 12 BIOS - 2MB Flash Others - Microsoft PC 2001 ® - LAN Wake Up Function - Suspend to RAM/DISk function - Top Tech III (Thermal Overheat Protection Technology) - PC Alert System Hardware Monitor Getting Started...
-
Page 13: Chapter 2. Introducing Mainboard
Introducing Mainboard Introducing Mainboard Introducing Mainboard Introducing Mainboard Introducing Mainboard 2.1 Mainboard Layout 2.1 Mainboard Layout 2.1 Mainboard Layout 2.1 Mainboard Layout 2.1 Mainboard Layout 2.2 CPU/Memory 2.2 CPU/Memory 2.2 CPU/Memory 2.2 CPU/Memory 2.2 CPU/Memory 2.3 Power Supply 2.3 Power Supply 2.3 Power Supply 2.3 Power Supply 2.3 Power Supply... -
Page 14: Mainboard Layout
Chapter 2 2.1 Mainboard layout The MPC651 is equipped with MS6760 proprietary mainboard. See the following for the mainboard layout: IDE Connectors DDR DIMM Slots Power Supply Connector ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ MS6760 v1.X Mainboard Front Panel Connector USB Connector... -
Page 15: Cpu/Memory
2.2 CPU/memory The MPC651 supports Intel The mainboard uses a CPU socket called PGA478 for easy CPU installation. When you are installing the CPU, make sure the CPU has a heat sink and a cooling fan attached on the top to prevent overheating. Overheating Overheating will seriously damage the CPU and system, always make sure the cooling fan can work properly to... -
Page 16: Power Supply
Chapter 2 2.3 Power Supply The system is equipped with a 200W(PFC) ATX power supply. The power cord of power supply has been connected to the connectors on the mainboard when shipped out. You can find two connectors (20-Piin & CN 20) on the mainboard. -
Page 17: Front Panel
2.4 Front panel The Front Panel is independent and extended from the mainboard. It’s connected to the Front Panel Connector on the mainboard. You can find the following ports on the Front Panel. Optical SPDIF-In Mic-In Head-Phone IEEE 1394 Port: J1394-2 The mainboard provides two IEEE 1394 ports. -
Page 18: Ieee 1394 Port: J1394-1
Chapter 2 IEEE 1394 Port: J1394-1 The bigger 6-pin IEEE 1394 Port on the back panel is designed for you to connect to IEEE 1394 devices without external power. That means the mainboard can provide the power for the devices connected to this port. Software Support IEEE 1394 Driver is provided by Windows dows... -
Page 19: Mic-In/Head-Phone
Mic-in/Head-Phone Mic-in is a connector for microphone. Head-Phone is a connector for Speakers or Headphones. OPTICAL SPDIF-in The OPTICAL connector allows you to receive the audio file of SPDIF interface for recording and playing. The SPDIF (Sony & Philips Digital Interface) is developed jointly by the Sony and Philips corporations . -
Page 20: Back Panel
Chapter 2 2.5 Back panel The Back Panel provides the following ports: Serial Port Mouse VGA Port Keyboard USB x 2 Serial Port The mainboard offers a 9-pin male DIN serial port . The port is 16550A high speed communication ports that sends/receives 16 bytes FIFOs. You can attach a serial mouse or other serial devices directly to the connector. -
Page 21: Vga Port
VGA Port The mainboard provides one DB 15-pin female connector to connect a VGA monitor. DB 15-Pin Female Connector Mouse/Keyboard Connectors The mainboard provides two standard mini DIN connectors for attaching PS/2 mouse and keyboard. You can plug a PS/2 ®... -
Page 22: Rj45 Lan Jack
Chapter 2 RJ45 LAN Jack The mainboard provides one standard RJ-45 jack for connection to Local Area Network (LAN). You can connect a network cable to the LAN jack. USB Ports The mainboard provides an OHCI (Universal Host Controller Interface) Universal Serial Bus root for attaching USB devices such as keyboard, mouse or other USB-compatible devices. -
Page 23: Parallel Port
Parallel Port The mainboard provides a 25-pin female centronic connector as LPT. A parallel port is a standard printer port that supports Enhanced Parallel Port (EPP) and Extended Capabilities Parallel Port (ECP) mode. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Pin Definition SIGNAL DESCRIPTION... -
Page 24: Audio Port
Chapter 2 Audio Port Speaker-out is a connector for Speakers or Headphones. Line-in is used for external CD player, Tape player, or other audio devices. Mic-in is a connec- tor for microphones. Speaker-out Line-in Mic-in ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 2-12... -
Page 25: Connectors
2.6 Connectors IDE Connectors: CN22 & CN23 The mainboard has a 32-bit Enhanced PCI IDE and Ultra DMA 33/66/100 controller that provides PIO mode 0~4, Bus Master, and Ultra DMA/33/66/100 function. The two connectors on the mainboard allows you to connect to two IDE device. -
Page 26: Front Panel Power Connector: Cn4
Chapter 2 Front Panel Power Connector: CN4 The mainboard provides a Front Panel connector for electrical connec- tion to the Front Panel switches and LEDs. CN4 is compliant with Intel Panel I/O Connectivity Design Guide. Reset Switch SIGNAL HD_LED_P FP PWR/SLP HD_LED_N FP PWR/SLP RST_SW_N... -
Page 27: Control Board Connector: Cn8
Control Board Connector: CN8 The connector is used to connect the Control Board on the front panel. +12VSBY Key (0-~5) VCC5SBY ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ CN 8 VCC3SBY SPI Bus... -
Page 28: Jumper
Chapter 2 2.7 Jumper There is a CMOS RAM on board that has a power supply from external battery to keep the data of system configuration. With the CMOS RAM, the system can automatically boot OS every time it is turned on. That battery has long life time for at least 5 years. -
Page 29: Slots
2.8 Slots PCI Slot The PCI slot allows you to insert PCI card or TV Tuner card. The TV Tuner card is included in the MEGA651. When adding or removing expansion cards, make sure that you unplug the power supply first. Meanwhile, read the documentation for the expansion card to make any neces- sary hardware or software settings NOTE: You can insert the OPTIONAL MS8606 card into the... -
Page 30: Chapter 3: Setting Bios Function
Setting BIOS Function Setting BIOS Function 3.1 Entering Setup 3.2 The Main Menu 3.3 Standard CMOS Features 3.4 Advanced BIOS Features 3.5 Advanced Chipset Features 3.6 Integrated Peripherals 3.7 Power Management Setup 3.8 PnP/PCI Configurations 3.9 PC Health Status 3.10 Frequency/Voltage Control... -
Page 31: Entering Setup
Chapter 3 3.1 Entering Setup Power on the computer and the system will start POST (Power On Self Test) process. When the message below appears on the screen, press <DEL> key to enter Setup. Press DEL to enter SETUP If the message disappears before you respond and you still wish to enter Setup, restart the system by turning it OFF and On or pressing the RESET button. -
Page 32: Getting Help
Getting Help After entering the Setup menu, the first menu you will see is the Main Menu. Main Menu The main menu lists the setup functions you can make changes to. You can use the control keys ( highlighted setup function is displayed at the bottom of the screen. Sub-Menu If you find a right pointer symbol (as shown in the right view) appears to the left of certain fields that means a sub-menu containing additional options can be... -
Page 33: The Main Menu
Chapter 3 3.2 The main menu Once you enter Phoenix-Award BIOS CMOS Setup Utility, the Main ® Menu (Figure 1) will appear on the screen. The Main Menu allows you to select from twelve setup functions and two exit choices. Use arrow keys to select among the items and press <Enter>... - Page 34 Setting BIOS Function Power Management Setup Use this menu to specify your settings for power management. PNP/PCI Configurations This entry appears if your system supports PnP/PCI. PC Health Status This entry shows your PC health status. Frequency/Voltage Control Use this menu to specify your settings for frequency/voltage control. Load Fail/Safe Defaults Use this menu to load factory default settings into the BIOS for stable system performance operations.
-
Page 35: Standard Cmos Features
Chapter 3 3.3 standard cmos features The items in Standard CMOS Features Menu are divided into 12 categories. Each category includes no, one or more than one setup items. Use the arrow keys to highlight the item and then use the <PgUp> or <PgDn> keys to select the value you want in each item. - Page 36 Press PgUp/<+> or PgDn/<-> to select Manual, None or Auto type. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category. If your hard disk drive type is not matched or listed, you can use Manual to define your own drive type manually.
- Page 37 Chapter 3 Video The setting controls the type of video adapter used for the primary monitor of the system. Available options are EGA/VGA. Halt On The setting determines whether the system will stop if an error is detected at boot. Available options are: All Errors No Errors All, But Keyboard The system doesn’...
-
Page 38: Advanced Bios Features
Setting BIOS Function 3.4 advanced bios features Quick Boot Setting the item to Enabled allows the system to boot within 5 seconds since it will skip some check items. Available options: Enabled, Disabled. Boot Sequence The items allow you to set the sequence of boot devices where BIOS attempts to load the disk operating system. - Page 39 Chapter 3 CPU L2 Cache ECC Checking This setting allows you to enable or disable the ECC (Error-Correcting Code) feature for error detection and correction when data passes through L2 cache memory. Setting options: Disabled, Enabled. Seek Floppy Setting to Enabled will make BIOS seek floppy drive A: before booting the system.
- Page 40 Security Option This specifies the type of BIOS password protection that is implemented. Set- tings are described below: Option Description The password prompt appears only when end users try Setup to run Setup. A password prompt appears every time when the com- System puter is powered on or when end users try to run Setup.
-
Page 41: Advanced Chipset Features
Chapter 3 3.5 advanced chipset features Advanced DRAM Control 1 Press <Enter> to enter the sub-menu and the following screen appears: System Performance The DRAM timing is controlled by the DRAM Timing Registers. The Timings programmed into this register are dependent on the system design. Slower rates may be required in certain system designs to support loose layouts or slower memory. - Page 42 Setting BIOS Function MA 1T/2T Select This setting controls the SDRAM command rate. Setting to Auto allows the SDRAM command rate to be determined by the BIOS. Selecting MA 1T/MA 2T makes SDRAM signal controller run at 1T/2T rate. 1T is faster than 2T. Setting options: Auto, MA 2T, MA 1T.
-
Page 43: Integrated Peripherals
Chapter 3 3.6 integrated peripherals SIS OnChip IDE Device Press <Enter> to enter the sub-menu and the following screen appears: Internal PCI/IDE This setting enables or disables the internal primary and secondary PCI & IDE controllers. Setting options: Disabled, Primary, Secondary, Both. 3-14... - Page 44 Setting BIOS Function IDE Primary/Secondary Master/Slave PIO The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of the four IDE devices that the onboard IDE interface supports. Modes 0 through 4 provide successively increased performance. In Auto mode, the system automatically determines the best mode for each device.
- Page 45 Chapter 3 USB 2.0 Supports Set to Enabled if you need to use any USB 2.0 device in the operating system that does not support or have any USB 2.0 driver installed, such as DOS and SCO Unix. Setting options: Disabled, Enabled. USB Keyboard Support Select Enabled if you need to use a keyboard in the Legacy operating system, such as DOS.
- Page 46 Onboard Super IO Device Press <Enter> to enter the sub-menu and the following screen appears: Onboard FDC Controller Select Enabled if your system has a floppy disk controller (FDD) installed on the system board and you wish to use it. If you install add-on FDC or the system has no floppy drive, select Disabled in this field.
- Page 47 Chapter 3 EPP Mode Select The onboard parallel port is EPP Spec. compliant, so after the user chooses the onboard parallel port with the EPP function, the following message will be dis- played on the screen: “EPP Mode Select.” At this time either EPP 1.7 spec or EPP 1.9 spec can be chosen.
- Page 48 Setting BIOS Function Display From CMOS This item allows you to enable or disable the function of display from CMOS in Window 2000. Setting options: Disabled, Enabled. Onboard LAN Device This item is used to enable or disable the onboard LAN controllers. Setting options: Enabled, Disabled.
-
Page 49: Power Management Setup
Chapter 3 3.7 Power management setup Sleep State This item specifies the power saving modes for ACPI function. If your operating system supports ACPI, such as Windows 98SE, Windows ME and Windows 2000, you can choose to enter the Standby mode in S1(POS) or S3(STR) fashion through the setting of this field. - Page 50 Power Management This item is used to select the degree (or type) of power saving and is related to these modes: Suspend Mode and HDD Power Down. There are three options for power management: Min Saving Minimum Power Management. Suspend Mode=1 Hour Max Saving Maximum Power Management.
- Page 51 Chapter 3 After AC Power Lost This setting specifies whether your system will reboot after a power failure or interrupt occurs. Available settings are: Leaves the computer in the power off state. Leaves the computer in the power on state. Restores the system to the status before power failure or Last State interrupt occurred.
- Page 52 Setting BIOS Function USB Wake Up from S3 This item allows the activity of the USB device to wake up the system from S3 (Suspend to RAM) sleep state. Settings are: Enabled and Disabled. PS2KB Wake Up from S3/S4/S5 This setting allows you to enter “Any Key” (max. 8 numbers) to wake up the system from S3/S4/S5 state.
-
Page 53: Pnp/Pci Configurations
Chapter 3 3.8 pnp/pci configurations This section describes configuring the PCI bus system and PnP (Plug & Play) feature. PCI, or Peripheral Component Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed the CPU itself uses when communicating with its special components. - Page 54 preceded by a “Ø”). The settings are: Auto (ESCD), Manual. IRQ Resources The items are adjustable only when Resources Controlled By is set to Manual. Press <Enter> and you will enter the sub-menu of the items. IRQ Resources list IRQ 3/4/5/7/9/10/11/12/14/15 for users to set each IRQ a type depending on the type of device using the IRQ.
-
Page 55: Pc Health Status
Chapter 3 3.9 PC health status Shutdown Temperature When the processor reaches the preset temperature, the ACPI-aware system will be shut down. Settings: Disabled, 85 C/185 F, 90 C/194 System/CPU Temperature, CPU Fan, Vcore, 3.3V, +5V, +12V, -12V, VBAT (V), 5VSB(V) These items display the current status of all of the monitored hardware devices/ components such as CPU voltages, temperatures and all fans’... -
Page 56: Frequency/Voltage Control
Setting BIOS Function 3.10 Frequency/Voltage Control CPU Clock Ratio This setting controls the multiplier that is used to determine the internal clock speed of the processor relative to the external or motherboard clock speed. Auto Detect DIMM/PCI Clk This option allows you to enable/disable the feature of auto detecting the clock frequency of the installed DIMM/PCI bus. - Page 57 Chapter 3 CPU Frequency Use this item to select the appropriate frequency for your CPU FSB. Options: Default, 100MHz, 133MHz. DRAM Frequency This setting shows the current frequency of DDR DRAM (read only). Options: By SPD, 200MHz, 266MHz, 333MHz. 3-28...