MSI E7320 Master-2S User Manual page 46

MS-9621 CEB Server Board
HyperThreading Technology
The processor uses Hyper-Threading technology to increase transaction rates
and reduces end-user response times. The technology treats the two cores
inside the processor as two logical processors that can execute instructions
simultaneously. In this way, the system performance is highly improved. If you
disable the function, the processor will use only one core to execute the
instructions. Please disable this item if your operating system doesn't
support 4-way processors & the sy stem with 2 HT processors, or
unreliability and instability may occur. Settings: [Enabled], [Disabled].
MSI Reminds You...
Enabling the functionality of Hyper-Threading Technology for your
computer system requires ALL of the following platform Components:
*CPU: Intel
*Chipset: Intel
*BIOS: A BIOS that supports HT Technology and has it enabled;
*OS: An operating system that supports HT Technology.
For more information on Hyper-threading Technology, go to:
Set Max Ext CPUID = 3
This setting sets the Max CPUID extended function value to 3.
Console Redirection
Press PgUp/<+> or PgDn/<-> to configure Console Redirection. The following submenu
will appear.
Com Port Address
This feature allows you to enable/disable the Com port on the motherboard.
Options: [Disabled], [On-board COM A].
Baud Rate
It allows you to select delay befor key repeat. Options: [300], [1200], [2400],
[9600], [19.2K], [38.4K], [57.6K], [115.2K].
3-12
® ®
Pentium 4 or Xeon™ Processors with HT Technology;
®
Chipsets that support HT Technology;
http://www.intel.com/info/hyperthreading
Console Redirection
Com Port Address :
Baud Rate :
Console Type:
Flow Control :
Console Connection:
Continue C.R. after POST :
[Disabled]
[19.2K]
[PC ANSI]
[CTS/RTS]
[Direct]
[Off]