“On/Off” button. Tap it once to start. To shut down the system, tap and hold for three seconds. Depending on the predefined configuration, the monitor will start in pre-clinical or clinical mode. Skillqube GmbH Tel: +49 6222 386 265 E-mail: info@skillqube.com Training.
If the app settings have been configured such that the media center does not open automatically when an ECG is printed, swipe from the right to the center to manually open the media center. To close it, swipe from the center to the right. Skillqube GmbH Tel: +49 6222 386 265 E-mail: info@skillqube.com Training.
Page 5
The alarm menu can be reached by tapping the bell icon. Enable or disable the field to set whether the alarm is on or off. Set alarm limits using the slider. To mute the alarms, tap the crossed-out bell icon. Skillqube GmbH Tel: +49 6222 386 265 E-mail: info@skillqube.com Training.
Page 6
You can switch between three different views by tapping the tile icon. e. Choose between clinical and pre-clinical monitor Use the button to the left of the blue on/off switch to switch between the pre-clinical and clinical monitor views. Skillqube GmbH Tel: +49 6222 386 265 E-mail: info@skillqube.com Training.
Enable/disable AED 2. AED instructions 3. Mode 4. Total time since AED activation 5. Number of shocks performed 6. Next analysis 7. Information about CPR feedback Skillqube GmbH Tel: +49 6222 386 265 E-mail: info@skillqube.com Training. Web: www.skillqube.com Simulation. Technology.
3. Mode display 4. Total time since manual defibrillator activated 5. Number of shocks performed 6. Time since last shock 7. Synchronized defibrillation on/off 8. Information about CPR feedback Skillqube GmbH Tel: +49 6222 386 265 E-mail: info@skillqube.com Training. Web: www.skillqube.com Simulation.
+/- keys. Tapping pause pauses the pacer. Switch pacemaker on/off 2. Set the current using +/- 3. Set the frequency using +/- 4. Pause the pacer (frequency divided by four) 5. Pacer runtime Skillqube GmbH Tel: +49 6222 386 265 E-mail: info@skillqube.com Training. Web: www.skillqube.com Simulation.
4. OFF 8. CPR feedback If you are using our qubeCPR, the participants using the qubeZERO unit will get feedback about the quality of their compressions. This can be found in the red window that appears in AED or manual mode (see sections 4 and 5).
Need help?
Do you have a question about the qubeZERO and is the answer not in the manual?
Questions and answers