Related Manuals for SKILLQUBE Ambu X
Summary of Contents for SKILLQUBE Ambu X
- Page 1 Ambu® X SKILLQUBE Instructions User guide for connecting the qubeSERIE (software version 5.1.1) to the AmbuMan® Wireless (software version 1.2.1)
- Page 2 Instructions Connection between Ambu® and SKILLQUBE Switch on the AmbuMan® using the ON / OFF button (see Figure 1) Note: The LED will flash green during the initialization process. When the LED is solid green, the AmbuMan® is powered up and has established its own wireless network. The AmbuMan® is then ready to establish a WLAN connection with the qubeCONTROL and a monitor or qubeASSESS.
- Page 3 2. Connect all iPads to the AmbuMan® Wi-Fi. To do this, go to the settings on both the qubeCONTROL and the monitor, click on Wi-Fi and connect to the network: AmbuW. As soon as the blue check mark appears to the left of AmbuW, a connection has been established (see Figure Figure 2: iPad settings with successfully connected Wi-Fi AmbuW...
- Page 4 3. Now start qubeCONTROL on your instructor iPad. Click on the Connect Device button at the top right of the connection center and connect your monitor first, then the AmbuMan®. Note: When connecting to the qubeSERIE for the first time, the AmbuMan® may not appear until 15-30 seconds after the monitor has been connected.
- Page 5 4. The monitor, AmbuMan® and qubeCONTROL are now connected and can communicate with each other. Figure 4: Connection center with connected AmbuMan®...
-
Page 6: Troubleshooting
Troubleshooting Problem Possible Cause Solution AmbuMan® does not appear in When configuring the In iPad's Settings, make sure the connection center. qubeCONTROL for the first the app has access to the local time, a pop-up window opens network. To do this, open iPad with the following message: Settings and scroll down on the left side until you see the... - Page 7 SKILLQUBE, it must be the SYNC button. synchronized with qubeCLOUD "This device cannot be in the qubeCONTROL and thus connected to AmbuMan®.
- Page 8 AmbuMan® Software Version Note: If you need the AmbuMan® software version, open any browser and enter 192.168.1.1/config in the address bar (see Figure 5). Note: To access this page, your AmbuMan® must be switched on and your device must be connected to the AmbuW Wi-Fi. Figure 5: Website for viewing AmbuMan®...
- Page 9 Imprint SKILLQUBE GmbH Im Singeisenhof 9, 4125 Riehen, Switzerland Registered: CH-130.4.021.682-6 Located in Riehen – Legal Representatives: Georg Hirsch, Cedric Zeller info@skillqube.ch +41 44 / 52 13 700 www.skillqube.com Online dispute resolution pursuant to Art. 14 (1) ODR Regulation: The European Commission provides a platform for online dispute resolution (OS), which you can find at...
Need help?
Do you have a question about the Ambu X and is the answer not in the manual?
Questions and answers