App Settings; On/Off And Views - SKILLQUBE qubeZERO User Manual

1. App settings

Monitor-specific app settings are set in the qubeCLOUD. Your organization's administrator or
device manager must make the appropriate settings. For more information, see the
instructions for qubeCLOUD and qubeCONTROL.
Only the app language is selected in the
local settings. You can also grant
permission to allow the app to connect to
the local network. This function must
always be enabled so that the
qubeSERIES apps can communicate with
each other!
2. On/off and views
Once you have started the app, start the qube
to start. To shut down the system, tap and hold for three seconds.
Depending on the predefined configuration, the monitor will start in pre-clinical or clinical
mode.
Skillqube GmbH Tel: +49 6222 386 265
E-mail: info@skillqube.com
Training.
Web: www.skillqube.com
Simulation.
Technology.
ZERO
using the blue "On/Off" button. Tap it once