Advertisement
8
OPERATING INSTRUCTIONS
Delay Time
6
The Delay Time option allows you
to automatically delay starting your
dishwasher 2, 4, or 6 hours.
To start the Delay Time option,
press Delay Time until the desired
delay time LED illuminates. A
light will come on indicating the
delay has been set and will remain
on until cycle starts. Press the
START/Cancel button to start the
delay option. If the delay option
is interrupted, the START/Cancel
button will have to be pressed again
to return to delay option.
To cancel the Delay Time option
and to begin the selected cycle
before the delay period is over,
press and hold START/Cancel
button for 3 seconds.
Control Lock
7
Lock the dishwasher controls by
pressing and holding the Control
Lock button until the lock LED
comes on to prevent children
from starting the dishwasher or
accidentally changing the wash
cycle. To unlock the controls, press
the Control Lock button until the
lock LED goes off.
Operating Instructions
Getting Started
1.
Load Dishwasher (See Preparing
and Loading Dishes).
2. Add detergent (See Dishwasher
Dispenser & Detergents).
3. Add Rinse Aid, if needed (See Rinse
Aid).
4. Run hot water faucet nearest
dishwasher until water is hot. Turn
water off.
5. Select desired Cycle (See Cycle
Chart).
6. Select desired Option (See Option
Selections).
7.
To start, press START/Cancel pad
and close door immediately.
To Start a Cycle
When cycle and options are selected,
LEDs of selected cycle and options
are illuminated, and the LED above the
START/Cancel button illuminates.
To start the cycle, press START/Cancel
button and immediately close the
dishwasher door.
To Cancel a Cycle and Delay
Cycle
Both a running cycle and a delay cycle can
be canceled at any time.
Open the dishwasher door and press the
START/Cancel button until the cycle and
option LEDs turn off. The running cycle or
delay countdown is canceled.
Press the START/Cancel button and close
the door immediately to drain. After a 90
second drain you may be able to select a
new cycle after canceling a previous wash
cycle.
Opening the door during cycle
If you open the door while a cycle is
running or delay is counting down, the
dishwasher will stop running.
The LEDs of selected cycle and options are
illuminated. The LED above START/Cancel
button will blink to press start.
To resume, press START/Cancel
button and close the dishwasher door
immediately.
The START/Cancel LED illuminates solid
after the START/Cancel button is pressed.
If the dishwasher door is kept open for
too long, or the door is closed without
pressing START/Cancel button, the
running cycle or delay countdown will be
canceled.
Console Lights
If it is desired to have the console lights
remain off while running, perform the
following operation: Prior to starting
a cycle, press and hold Heavy Wash
and Rinse Only simultaneously for
approximately 8 seconds until the
corresponding lights flash. This will
turn the console lights off during cycle
operation. Simply repeat this operation
to revert back to the previous setting.
Advertisement
