Advertisement
Spray Arm
varies by model
Glass Trap
Removal
Glass Trap
Replacement
To empty the glass trap:
1.
Pull the glass trap handle up and out
toward you to remove.
2. Empty any debris collected in the
glass trap.
3. Once empty, slide the glass trap
back into the same location as when
removed, then push down to lock
back into position. See image above.
CARE AND CLEANING
WARNING
Allow heating element to
cool before cleaning the
interior.
Failure to do so can result in
burns.
Outer Door - Clean outer door with warm
soapy water and a dishcloth or sponge.
Rinse with clean water and a dry cloth.
Do not use harsh cleaners.
Inside - The inside of the dishwasher and
filter are self-cleaning with normal use.
If needed, clean around the tub gasket
area with a damp cloth. The filter is
self-cleaning. A glass trap located in the
center of the filter is designed to collect
pieces of broken glass, straws, bones and
pits.
Overfill Protector- keeps dishwasher from
overfilling and is located in the left front
corner of the tub.
•
Clean occasionally with household
cleaner containing vinegar or bleach
to dissolve any buildup.
•
Overfill Protector should move up
and down freely about one inch.
If it does not move, lift and clean
underneath.
NOTE
Hard water may cause lime deposit
buildup on the interior of the
dishwasher. For cleaning instructions
see "Removing Spots and film" section.
15
Burn Hazard
Advertisement
