Report No FDD for WIN 95
For compatibility with W indows 95 logo certification, select Yes to release IRQ6 when
the system contains no floppy drive. W hen this setting is set to Yes, users have to
select Disabled for the Onboard FDC Controller in the Integrated Peripherals menu.
Setting options: [No], [Yes].
Full Screen LOGO Display
This item enables you to show the company logo on the bootup screen. Setting
options are:
[Enabled]
Shows a still image (logo) on the full screen at boot.
[Disabled]
Shows the POST messages at boot.
Small Logo(EPA) Display
This item enables you to show the EPA logo (brand specific graphics) on the bootup
screen. Setting options are:
[Disabled]
Shows the normal POST screen at boot.
[Enabled]
Shows a still image (EPA logo) on the screen at boot.ot.
BIOS Setup
3-11