Fwh/Lpc Debugging Pin Header: Jlpc1; Wake On Lan Connector: Wol; Chassis Intrusion Switch Connector: Jc1 - MSI 915GM User Manual

FWH/LPC Debugging Pin Header: JLPC1

The pin header is for internal debugging only.
1
2
JLPC1
14
13

Wake On LAN Connector: WOL

This connector allows you to connect to a LAN card with W ake On LAN
function. You can wake up the computer via remote control through a local area
network.
MSI Reminds You...
To be able to use this function, you need a power supply that provides
enough power for this feature. (750 mA 5V Stand-by)

Chassis Intrusion Switch Connector: JC1

This connector is connected to a 2-pin chassis switch. If the chassis is opened,
the switch will be short. The system will record this status and show a warning
message on the screen. To clear the warning, you must enter the BIOS utility and
clear the record.
Pin Definition
PIN SIGNAL PIN
1 LCLK 2
3 LRST# 4
5 LAD0 6
7 LAD1 8
9 LAD2 10
11 LAD3 12
13 LFRAME# 14
WOL
1 5VSB
GND
MP_WAKEUP
JC1
1
CINTRU
2
GND
Hardware Setup
SIGNAL
Key (no pin)
VCC3
FID0_LRST
VCC5
Key (no pin)
GND
GND
2-19