Nitecore NPL20 - Universal Compact Weapon Ligh Manual

Table of Contents

Contents

1 Warnings
2 Features
3 Specifications
4 Accessories
5 Battery Options
6 Technical Data
7 Battery Installation
8 Mounting
9 Operating Instructions
10 Documents / Resources
- 10.1 References
- 10.2 Download manual

Warnings

Always make sure your firearm is clear and unloaded before mounting/dismounting the product or changing the battery.
Always obey the safety regulations when operating the firearms to avoid accidental damage to personal health or property.
CAUTION! Possible dangerous radiation! Don't look into the light! May be dangerous for your eyes.
Always dismount the product when maintaining the firearms.
When the product is left unused, please remove the battery to prevent leakage or accidental activation.

Features

Utilizes a CREE XP-G3 S3 LED with an output of 460 lumens
An optical system combined with crystal coating and "Precision Digital Optics Technology" (PDOT)
Throw of 76 meters and peak beam intensity of 1,440cd
Powered by 1 x CR123A battery with a runtime of 50 minutes
Advanced Power Cut-Off (APC) technology for an ultralow standby power consumption
Incorporated Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6)
Anti-impact reverse polarity protection mechanism specially designed for shooting sports (Patent No. ZL201220677948.7)
STROBE Mode uses randomly changing frequencies for stronger dizzying effects
Highly efficient constant current circuit provides a stable output
Picatinny rail mount equipped for quick mounting
Constructed from aero grade aluminum alloy
HA III military grade hard-anodized finish
Waterproof and dustproof rating in accordance with IP67
Impact resistant to 1 meter

Specifications

Dimensions: 64.5mm×36mm×33mm
(2.54"×1.42"×1.30")
Weight: 71.5g (2.52oz)

Accessories

Spare O-ring, CR123A Battery

Battery Options

	Type	Nominal Voltage	Compatibility
Primary Lithium Battery	CR123A	3V	Y (Compatible)
Rechargeable Li-ion Battery	RCR123A	3.6V/3.7V	N (Incompatible)

Technical Data

FL1 STANDARD	CONSTANT-ON	STROBE
	460 Lumens	460 Lumens
	50min	─
	76m	─
	1,440cd	─
	1m (Impact Resistance)
	IP67

Note: The stated data is measured in accordance with the international flashlight testing standards ANSI/PLATO FL 1-2019, using 1 x CR123A lithium battery (1,600mAh) under laboratory conditions. The data may vary in real world use due to different battery usage or environmental conditions.

Battery Installation

Mounting

ALWAYS MAKE SURE YOUR FIREARM IS CLEAR AND UNLOADED BEFORE MOUNTING OR DISMOUNTING THE PRODUCT!

Unscrew the mounting screw counterclockwise.
Align the stopper with the recoil groove of the rail.
Tighten the screw clockwise.

Operating Instructions

Battery Installation

As illustrated, unscrew the battery cap next to the light counterclockwise with a screwdriver or a coin etc., insert the battery and screw to tighten the cap.

The product will not work if the battery is incorrectly inserted.
CAUTION! Possible dangerous radiation! Don't look into the light! May be dangerous for your eyes.
When the product is left unused, please remove the battery to prevent leakage or accidental activation.

Mounting

ALWAYS MAKE SURE YOUR FIREARM IS CLEAR AND UNLOADED BEFORE MOUNTING OR DISMOUNTING THE PRODUCT!

Unscrew the mounting screw counterclockwise.
Align the stopper with the recoil groove of the rail.
Tighten the screw clockwise.

Tactical Momentary Illumination

Press and hold either Power Button to turn on the light momentarily. Release to turn it off.

On / Off

On: When the light is off, short press either Power Button to turn it on.

Off: When the light is on, short press either Power Button to turn it off.

STROBE Mode

When the light is on/off, triple press either Power Button to access the STROBE Mode. When the STROBE Mode is on, short press either Power Button to turn off the light.

ATR (Advanced Temperature Regulation)

The integrated ATR technology regulates the output of the NPL20 according to the working condition and ambient environment to maintain the optimal performance.

Always make sure your firearm is clear and unloaded before mounting/dismounting the product or changing the battery.
Always obey the safety regulations when operating the firearms to avoid accidental damage to personal health or property.
CAUTION! Possible dangerous radiation! Don't look into the light! May be dangerous for your eyes.
Always dismount the product when maintaining the firearms.
When the product is left unused, please remove the battery to prevent leakage or accidental activation.

Changing Batteries

The battery should be replaced when the output appears to be dim due to low power.

Note: Always make sure your firearm is clear and unloaded before changing the battery.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant.

SYSMAX Innovations Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address: Rm 2601-06, Central Tower, No.5 Xiancun Road,
Tianhe District, Guangzhou, 510623, Guangdong,
China
Made in China