Dometic PerfectView CAM 360 AHD Operating Manual page 17

CAM360
6 Using the video system
6.1 Switching the video system on/off
I
NOTE
The video system is switched on as soon as the ignition of the vehicle is
switched on.
In its basic setting, the video system shows two images on a split screen: a
360° panorama view on one half, and the image from the front camera on the
other half (fig. 6, page 4).
The 360° panorama view is always displayed. The display of the individual image
from one of the four cameras can be selected with the arrow buttons or with the left
turn signal, right turn signal and reverse gear input signals.
➤ Press
to switch off the video system.
6.2 Selecting cameras
➤ Press
, ,
✓ The symbol (fig. 6 1, page 4) for the relevant camera is highlighted.
➤ Operate the left or right turn signal to activate the camera image of the relevant
side.
➤ Shift to reverse gear to activate the rear camera image.
EN
to select the front, rear, left or right camera.
,
Using the video system
17