Dometic PerfectView CAM 360 AHD Operating Manual page 15

CAM360
➤ Select "CONTROL SET".
➤ Select "REAR MIRROR".
➤ Make the following settings:
– "OFF"
– "ON"
➤ Select "REAR MIRROR DURATION".
➤ Make the following settings:
– "CONST ON" (permanent)
– "INTERRUPTED"
➤ Select "START BY CLAMP 15" (start upon ignition).
➤ Make the following settings:
– "OFF"
– "ON"
– "15 SECOND"
– "1 MINUTE"
➤ Select "TURN SIGNAL".
➤ Make the following settings:
– "2 SECOND"
– "5 SECOND"
– "10 SECOND"
➤ Select "REVERSE GEAR".
➤ Make the following settings:
– "5 SECOND"
– "10 SECOND"
– "20 SECOND"
– "1 MINUTE"
– "10 MINUTE"
➤ Save your settings.
EN
Video system settings
15