3-2 Jumper Settings
JCMOS:
To CMOS Clear data, please follow the steps below.
1. Turn off the system.
2. Change the jumper from 1-2 to 2-3 position for
a few seconds.
3. Replace the jumper on to the 1-2 position.
4. Turn on the system and hold down the <Del> key
to enter BIOS setup.
JCLK:
Note: Overclocking may result to the CPUs or systems
instability and are guaranteed to provide better
system performance.
Installation
Settings:
1-2: Normal (Default)
2-3: Clear CMOS
Settings:
1-2: 100/133 MHz
2-3: 133/166/200 MHz (Default)
Page 3-5