Advertisement
Water Supply And Drain
About the safety supply hose
The safety supply hose consists of the double
walls. The hose's system guarantees its
intervention by blocking the flow of water in
case of the supply hose breaking and when
the air space between the supply hose itself
and the outer corrugated hose is full of water.
WARNING
A hose that attaches to a sink spray can burst if it is installed on the same
water line as the dishwasher. If your sink has one, it is recommended that
the hose be disconnected and the hole plugged.
How to connect the safety supply hose
1. Pull The safety supply hoses completely out from storage compartment located at
rear of dishwasher.
2. Tighter the screws of the safety supply hose to the faucet with thread 3/4 inch.
3. Turn water fully on before starting the dishwasher.
How to disconnect the safety supply hose
1. Turn off the water.
2. Unscrew the safety supply hose from the faucet.
16
safety supply hose
Advertisement
