Safety Warnings; Legal Notice - V2C Trydan User Manual

1. SAFETY WARNINGS

· The owner is obliged to comply with the safety instructions. V2C accepts no liability for any
claims arising from such non-compliance.
· This mode 3 charging point is classified in accordance with section 5 of UNE-EN 61851-1 in an EV
power supply system connected to an AC mains supply. Depending on the version chosen, the
EV power supply system will be plug and cord or permanently connected. It can be used both
outdoors and indoors, and can be used in both restricted and unrestricted access.
· Never use damaged, worn or dirty charging connectors.
· The owner shall ensure that the charger is always operated in perfect condition.
· The charging plug or connector (including the charging cable) and the charging station
housing must be checked regularly for damage (visual inspection).
· In the event of a defect, the charging station must be disconnected and replaced.
· Repairs to the charging station are prohibited and may only be carried out by the manufacturer
(e-Charger must be replaced).
· Do not make any unauthorized change or modifications to the charging station!
· The use of adapters or converters/prolongers is not permitted.
· Do not remove any identification such as safety symbols, warning signs, type plates,
nameplates or line markings!
· Ventilation: Due to the possible release of toxic or explosive gases during the indoor charging
process, some require an external ventilation system.
· Unplug the charging cable by pulling on the connector, never on the cable. Danger of damage!
· Never clean the charging station with a high-pressure water jet (hose, high-pressure cleaner,
etc.)

2. LEGAL NOTICE

This manual is subject to change without notice. The images in this manual contained in this
manual are representative and may differ slightly from the actual products.
2