Call Completion......................45 Call forwarding......................47 General........................48 Immediately........................ 49 On busy........................50 On no reply........................ 51 Call type.........................52 Call waiting........................53 Caller list........................55 Overview of call lists....................56 Redial List........................57 COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 2 -...
Page 3
PBX..........................96 VoIP provider......................97 Idle state........................99 InterCom........................101 Jitter buffer........................103 Language and location....................104 LDAP..........................105 LLDP..........................107 Logging........................108 Loudspeaker listening mode..................109 Music on hold......................110 COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 3 -...
Page 4
SIPS..........................143 Sound........................... 144 Speed dial........................147 SRTP..........................150 Sync..........................151 Trace..........................153 Transferring calls......................155 Call transfer types....................156 Transfer the call with an announcement..............157 Transferring a call without an announcement............158 COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 4 -...
Page 5
Headset Call........................ 200 Calls..........................202 Pick-Up.........................205 Device Overview......................207 Front View........................208 Rear View........................211 Using the Web Interface....................214 Basic Knowledge......................215 Opening the web interface..................216 Operating Instructions....................218 COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 5 -...
Page 6
Call forwarding on no reply................254 Call waiting......................255 CF ext. calls: Immediately.................. 256 CF ext. calls: On busy..................257 CF ext. calls: On no reply...................258 Do not disturb..................... 259 DTMF-Relay......................260 Group........................261 COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 6 -...
Page 7
Camera management....................297 Settings........................299 Update.......................... 301 Basic Settings......................302 Restart and factory reset..................303 Schedule........................304 Network........................305 Current Settings....................... 306 IPv4.......................... 308 IPv6.......................... 310 VLAN........................312 COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 7 -...
Page 8
Ringtone management.....................349 Upload ringtone....................350 Settings........................351 Date and time......................352 User..........................354 User administration....................355 Settings........................357 Backup and restore....................359 Access..........................360 General settings.......................361 Developer options....................362 Action URL......................363 COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 8 -...
Page 9
Navigation in menus................... 412 Notifications......................413 Keys and LEDs......................414 Keypad........................ 415 Dedicated function keys..................416 Delete, Home and Back..................418 Directional pad and OK..................419 LED signalling on function keys................. 420 COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 9 -...
Page 11
Configure Wi-Fi....................505 Sound........................506 Language and location.................... 508 Display and LED......................509 Telephony......................... 514 Call waiting......................515 Audible indication....................516 Do not disturb..................... 517 Call forwarding....................518 Anonymous call....................520 COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 11 -...
Page 12
CF ext. calls: On busy................... 546 CF ext. calls: On no reply................547 Do not disturb....................548 DTMF-Relay....................549 Group......................550 Group (incoming)....................551 Group (outgoing).................... 552 Park position....................553 Relays......................554 Silent Alert...................... 555 COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 12 -...
If a key to which a function has not been assigned is pressed for a longer time (long press), the menu for configuring the selected key opens automatically. Further help under Function keys. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 16 -...
Page 17
Further help under Silent Alert. Update Note inserted for displaying error messages in case of failed boot process in the updater. Further help under Update. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 17 -...
Page 18
Auerswald/FONtevo PBXs (support for COMtrexx from release 1.8). Further help under Voicemail App. Video tutorials Functions and Applications: Integration of video tutorials on specific topics. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 18 -...
Page 19
The »Advanced Information« has been integrated into the firmware and can be accessed in the Help Panel by selecting the desired question mark behind the settings or the first aid symbol. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 19 -...
About these instructions About these instructions Gender Notice Trademarks Licenses Instructions COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 20 -...
Gender Notice Gender Notice The English-language documentation does not use gender-specific forms of address. Any references to persons apply to all people of all genders. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 21 -...
Android and Google Search are trademarks of Google, Inc. Microsoft, Windows and ActiveSync are registered trademarks of Microsoft Corporation in the USA and/or other countries. All other trademarks mentioned are the property of the relevant manufacturer. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 22 -...
The software in this product contains elements of copyright-protected software that is subject to the GPL, the LGPL or other licenses. To view the licences, select Settings > About phone > Licenses. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 23 -...
You will find the Operating Manual and the Quick Guide on our web site. After an update, you usually require a new version of the instructions. You will find these on our website. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 24 -...
Cameras Central caller list Certificate Codecs Conference call Contact Date and time Device Information Dial a Subscriber Number Manually Direct call Display and LED Do not disturb COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 25 -...
Page 26
Loudspeaker listening mode Music on hold Network Notifications Outbound proxy Park position Passwords Pick-Up Query Calls Redial List Reset to default Reverse search Roaming User Silent Alert Silent Call COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 26 -...
Page 27
Functions and Applications SIPS Sound Speed dial SRTP Sync Trace Transferring calls Update User roles and permissions Using provisioning Voicemail App Voicemail number Wallpaper Wi-Fi XML Minibrowser COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 27 -...
Information about the section Information about the section This section describes how to configure and use the functions on your phone. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 28 -...
Web interface: • Access Details about the settings are in Access Phone: • Access Details about the settings are in Access Provisioning: Further help in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 29 -...
Page 30
Connects two existing calls *join *conference Conference call DTMF *dtmf 2. If a token is used for authentication, the token must be sent in the request header. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 30 -...
Page 31
The action you want is carried out. Note: For full functionality, some commands that are to be executed will need additional parameter settings. Further help in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 31 -...
Dialled calls Phone: • Settings > Telephony > Anonymous call Details about the settings are in Anonymous call Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 32 -...
Page 33
CLIR (number presentation suppression) type as is set on the PBX/at the provider. Details about the settings are in Options for experts Details about the settings are in Function codes COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 33 -...
Internet to add new functions to your telephone. Important: If you install additional apps, the telephone's functionality may be affected, including loss of use. When the Auerswald service team or Auerswald's specialised dealer checks the telephone, it is reset to its factory settings. This process removes any previously installed applications and data, so these must then be reinstalled separately.
Automatic call acceptance Phone: • Settings > Telephony > Automatic call acceptance Details about the settings are in Telephony Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 35 -...
Phone: • Settings > Telephony > Automatic start of call Details about the settings are in Telephony Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 36 -...
• The phone's address books • Connection data sets with the destination, source, and time information for a telecommunication connection. • Potentially WLAN passwords • VPN information and VPN credentials COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 37 -...
Page 38
Configuration Web interface: • Backup and restore Details about the settings are in Backup and restore COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 38 -...
The maximum range in the Bluetooth network is 10 m. Connection A Network port B Direct PC connection via network cable C Headset socket D Receiver socket COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 39 -...
Page 40
• Plug in the COMfortel D-Wireless dongle (EZC-5200BS) when the device has no power supplied to it • Reboot after plugging in the COMfortel D-Wireless dongle (EZC-5200BS) when the device is operating. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 40 -...
Page 41
Bluetooth devices. Deactivate Bluetooth on devices in range. 6. To close a connection, select the paired device in the list and then select OK at the prompt to confirm. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 41 -...
When your call partner ends the call, your phone goes into its idle state. If you hang up the receiver, you will hear the busy signal through the base unit loudspeaker if the receiver has been hung up incorrectly. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 42 -...
Page 43
Note: If you want to end the current call, and then immediately make a new call, press the soft key End and then start dial the next number. Description of the operation under Call COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 43 -...
Call bindings Phone: • Settings > Telephony > Call bindings Details about the settings are in Telephony Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 44 -...
Details about provisioning this function in the Auerswald DokuWiki Process 1. You call a subscriber and hear the busy tone. 2. Press the appropriate soft key to activate the automatic callback. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 45 -...
Page 46
3. A notification is displayed as soon as the called number is no longer busy. 4. Confirm the notification to call the subscriber, who is now free. 5. The callback process is then deleted in the PBX. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 46 -...
You can make the following settings: • Type of call forwarding (Immediately, On busy, By time) • Call forwarding destination • Waiting time before call forwarding COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 48 -...
Phone: • Settings > Telephony > Call forwarding > Immediately Details about the settings are in Telephony Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 49 -...
• Settings > Telephony > Call forwarding > On busy Details about the settings are in Telephony Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 50 -...
• Settings > Telephony > Call forwarding > On no reply Details about the settings are in Telephony Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 51 -...
During operation on a PBX: • External call • Internal call • Group calling (a call made to a specific group) • External recall • Internal recall COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 52 -...
• Settings > Telephony > Call waiting / Audible indication Details about the settings are in Telephony Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 53 -...
Page 54
− You forward the call waiting call. The call waiting caller also hears the ringing tone until the called person lifts their handset. You are now connected to the first call partner. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 54 -...
Note: If several (incoming, outgoing or missed) calls with the same phone number occur one after the other, they are grouped and displayed as a single call. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 56 -...
Calling from the redial list • Pick up the receiver • OK • Headset • Loudspeaker • Touch entry Deleting Entries from the Redial List • Entire list: Clear COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 57 -...
Page 58
Redial List • Open list > Delete from list • Entire list: Clear (approx. 2 seconds) COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 58 -...
• Pick up the receiver • OK • Headset • Loudspeaker • Touch entry Deleting Entries from the List of Missed Calls • Individual entry: Delete key COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 59 -...
Page 60
Note: You cannot use the Message button to display seen missed calls if the display has been set to Disabled in the Display and LED > Seen missed calls menu option. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 60 -...
Call history Phone: • Settings > Telephony > Log calls Details about the settings are in Log calls Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 61 -...
• Left: standard view • Right: view without widgets Requirement for use • You need to know the URL, user name and password of the camera to be connected COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 62 -...
Page 63
Web interface: • Cameras Details about the settings are in Cameras Phone: • Cameras Details about the settings are in Camera Provisioning: Further help in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 63 -...
If the telephone is not registered when it receives an incoming call, or if an update is being performed, the list in the telephone is updated when the connection is restored. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 64 -...
Page 65
(if this function is enabled). Further help under Roaming User Requirement for use The function is enabled in the PBX. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 65 -...
• Network > Topology > Check hostname Details about the settings are in Security Details about the settings are in Topology Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 66 -...
Details about the settings are in Codecs Phone: • Settings > Identities > Options for experts > Audio Details about the settings are in Audio Provisioning: Further help in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 67 -...
The conference call is cancelled. One subscriber is put on hold and there is an active connection with the other subscriber. You can change between holding a call and an active call. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 68 -...
Page 69
This also applies if one of the conference call partners hangs up. Ending a conference call completely If you initiated the conference call, you can end the conference call completely. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 69 -...
Contacts to whom calls are made frequently can also be displayed in the Favorites list. Contacts can be saved using backup. Further help under Backup and restore COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 70 -...
Page 71
F Displays more options. G Opens the menu Add Contact. H Alphabetical register Contact profile consisting of a coloured circle and abbreviated name or contact photo, if selected. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 71 -...
Page 72
Note: The contact photos are called every time a call is made. There may be a slight delay in displaying them. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 72 -...
Page 73
H Profile of the contact you have created. Note: Options I, J and K are only displayed for an existing contact, not for a contact that has just been created. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 73 -...
Page 74
• The options Delete , Edit or Mark as favourite are not available • An LDAP contact is copied and added to the list of locally created contacts. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 74 -...
PC, and a recall can be triggered by clicking with the mouse. The implementation of CTI takes place in the devices of the COMfortel D- series via Action-URL. Further help under Action URL COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 75 -...
Date and time Phone: • Settings > Date and time Details about the settings are in Date and time Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 76 -...
Display Options Web interface: • Dashboard Details about the settings are in Status information Phone: • Settings > About phone Details about the settings are in About phone COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 77 -...
VoIP provider's voice mailbox. If you want to exit dial preparation without dial the subscriber number entered, press Back Description of the operation under Dialled calls COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 78 -...
• Telephony > Call settings > Direct call Details about the settings are in Direct call Phone: • Settings > Telephony > Direct call Details about the settings are in Direct call COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 79 -...
Page 80
Direct call Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 80 -...
Note: To display the slider used to set the brightness, you can also drag the status bar out of the top display edge. Details about the settings are in Display and LED Provisioning: COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 81 -...
Page 82
Display and LED Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 82 -...
Call signalling Phone: • Settings > Telephony > Do not disturb Details about the settings are in Telephony Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 83 -...
• The fallback identity must be configured on a different PBX or at a different provider. Configuration Web interface: • Identities > Options for experts > Fallback for COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 84 -...
Page 85
• This setting is necessary for a fallback identity: 1. In the "Fallback for" list, select the identity that is to be covered by a second if it becomes necessary. 2. Save COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 85 -...
Configuration Web interface: • Function keys Details about the settings are in Function keys Phone: • Settings > Function keys COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 86 -...
Page 87
(long press), the menu for configuring the selected key opens automatically. • If necessary, change between key levels by pressing the control rocker. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 87 -...
Page 88
You can use the templates in a provisioning file to extend the range of functions on the phone. These additional functions can be assigned to function keys. Requirement for use COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 88 -...
Page 89
• The URL of the external server on which the picture is stored • picture with Base64 encoding • Speed dial number is configured Further help under Speed dial Further help in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 89 -...
Page 90
− .png − .bmp − .gif (animations are not displayed) Link to video (only in German) https://www.youtube.com/watch? v=bYMfJZkbuyU Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 90 -...
Function templates Function templates If a device in the COMfortel® D-series is used on an Auerswald/FONtevo PBX, this function is used to provide access to templates and scripts that are specially designed for running on Auerswald/FONtevo PBXs. It is not necessary to have correctly configured provisioning to use it.
This enables you to phone if you don't have a hand free. Other people in the room can take part in the call. Details about the settings are in Hands-Free Calling COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 92 -...
• Ending a call in headset operation • Initiating the listen-in function on the receiver • Ending the listen-in function through the receiver Description of the operation under Headset Call COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 93 -...
Caution: The default identity does not switch automatically. If a default identity fails, the LED on the appropriate function key lights up red. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 95 -...
Details about the settings are in Identities Phone: • Settings > Identities Details about the settings are in Identities Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 96 -...
SIP Username = internal number as assigned on the PBX SIP Registrar = The PBX's IP address 2. Enable an identity Web interface: • Identities > Display settings Details about the settings are in Identities Phone: COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 97 -...
Page 98
VoIP provider • Settings > Identities Details about the settings are in Identities Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 98 -...
Note: "No automatic" is set as the default value. Configuration Web interface: • Display > Basic Settings > Idle state Details about the settings are in Display and LED Phone: COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 99 -...
Page 100
• Settings > Display and LED > Idle state Details about the settings are in Display and LED Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 100 -...
• Telephony > Call settings > Automatic call acceptance Details about the settings are in Automatic call acceptance Phone: • Settings > Telephony > Automatic call acceptance Details about the settings are in Telephony Provisioning: COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 101 -...
Page 102
2. If the Beep when connecting setting is activated, a short signal tone is output at the InterCom destination. 3. A bi-directional connection is then present between the InterCom source and InterCom destination without a call being actively taken. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 102 -...
Jitter buffer Phone: • Network > Topology > Basic Settings Details about the settings are in Topology Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 103 -...
Details about provisioning this function in the Auerswald DokuWiki Note: In the web interface, you can set both the language and location, both for the web interface and for the phone. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 104 -...
LDAP filter syntax is used. RFC 2254 and RFC 4515 are used. Phone: • Settings > LDAP Details about the settings are in Contacts/LDAP COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 105 -...
Page 106
LDAP Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 106 -...
Details about the settings are in Topology Phone: • Network > Topology > Basic Settings Details about the settings are in Topology Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 107 -...
Details about the settings are in Logging Phone: • Settings > Access Details about the settings are in Access Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 108 -...
The call is continued using the microphone in the receiver (not hands-free operation). Description of the operation under Loudspeaker listening COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 109 -...
• Settings > Identities > Options for experts > Audio > Music on hold Details about the settings are in Audio Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 110 -...
Phone: • Settings > Identities > Options for experts > NAT Details about the settings are in Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 111 -...
It provides a way for multiple users to access shared resources. These protocols can be set up for the device: • IPv4 • IPv6 • VLAN • VPN COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 113 -...
Details about the settings are in IPv4 Phone: • Settings > Network > IPv4 Details about the settings are in IPv4 settings Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 114 -...
Details about the settings are in IPv6 Phone: • Settings > Network > IPv6 Details about the settings are in IPv6 Settings Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 115 -...
Details about the settings are in VLAN Phone: • Settings > Network > VLAN Details about the settings are in VLAN Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 116 -...
Details about the settings are in Provisioning: Note: An example configuration, for a FRITZ!box (a German DSL modem/router), is described in the Auerswald DokuWiki. This COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 117 -...
Page 118
− DNS server − Search domain − IPsecIdentifier − Forwarding routes − preinstalled IPsecSecret 4. Load files for these parameters: − IPsecUserCert − IPsecUserPrivateKey − IPsecCaCert − IPsecServerCert COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 118 -...
Page 119
Caution: Settings for VPN connections of the type IPsec Xauth RSA and IPsec Hybrid RSA can vary greatly, depending on which server is in use. The network administrator must predefine the configuration. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 119 -...
Details about the settings are in Topology Phone: • Network > Topology Details about the settings are in Topology Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 120 -...
• Settings > Identities > select an identity > Options for experts > Audio Details about the settings are in Identities Provisioning: Further help in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 121 -...
• Settings > Identities > Options for experts > Outbound proxy Details about the settings are in Outbound proxy Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 122 -...
Note: The phone number/URI to be assigned consists of the internal base phone number assigned in the PBX for the open query call and the park position (0 to 9). COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 123 -...
Page 124
• If this user is busy, the call is kept in the park zone again for the set time. • If the hold time expires a second time, without the call being taken, the connection is disconnected and the caller hears the busy signal. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 124 -...
• From the factory settings: Password dialogue is displayed when user enters phone's IP address in web browser • User Details about the settings are in User Phone: COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 125 -...
Page 126
Passwords • Settings > Access > Password web interface Details about the settings are in Access Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 126 -...
Note: To perform a pick-up using the speed dial button, you must enter the pick-up code. • Function key with the speed dial for the internal phone that is to be called configured on it COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 128 -...
Note: To perform a pick-up using the speed dial button, you must enter the pick-up code. • Function key with the speed dial for the internal phone that is to be called configured on it COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 129 -...
Alternatively, one of the call partners can simply hang up so that you can continue talking with the other call partner. Description of the operation under Query Calls COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 130 -...
Page 131
• Connecting the two call partners to each other If you would like to let your call partners speak with each other, you can connect them. Description of the operation under Query Calls COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 131 -...
Update Phone: • Settings > Update > Reset to default • Follow the instructions in Procedure directly on the device Details about the settings are in Update COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 133 -...
Page 134
Note: If you do not release the Hold button and the directional in the predefined time window, the phone boots in the normal way. The phone is not reset to its default settings. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 134 -...
Call signalling Phone: • Settings > Telephony > Reverse search Details about the settings are in Reverse search Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 135 -...
Roaming User authorisation must be assigned to the user in the PBX. Process for logging onto/logging off the telephone 1. The function key Login / Logout is provisioned by the PBX. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 136 -...
Page 137
(if the corresponding function is enabled). Further help under Central caller list Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 137 -...
− Delay 0 sec: The silent alarm is sent immediately. − Delay min. 1 sec: A countdown counter appears on the display. The following options are also available Dismiss: Cancels the silent alarm. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 138 -...
Page 139
• Alternatively, a warning can be sent as a SIP message to a stored number. You will find the Lua template required to provision the function key in the Auerswald Dokuwiki. Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 139 -...
1. Provide a suitable provisioning file. 2. Activate Provisioning from PBX search. 3. Enter the relevant Provisioning server URL. 4. Set up a function key with the extended function provided by provisioning. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 140 -...
Most Internet services are implemented with TCP, e.g., HTTP (WWW), SMTP/POPS (e-mail), etc. Configuration Web interface: • Identities > Options for experts COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 141 -...
Page 142
Details about the settings are in Options for experts Phone: • Settings > Identities > SIP Details about the settings are in Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 142 -...
• Settings > Identities > Options for experts > Security > SIPS Details about the settings are in Security Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 143 -...
The contact melody defined in the telephone is used first. 2. The alert info in the SIP Invite has a valid URL for a ringtone that can be downloaded externally. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 144 -...
Page 145
1. All available sounds are listed. 2. A plying of the tone is achieved by − navigation in the list using the directional pad keys − hovering over the selected entry COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 145 -...
Page 146
3. When you confirm your ringtone selection, the menu closes. The selected sound is then used as the default for incoming calls. Link to video (only in German) https://www.youtube.com/watch? v=DtrNdzMUOBQ COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 146 -...
Configuration Web interface: • Function keys > Speed dial COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 147 -...
Page 148
<key keyNumber="" icon="" info="" label=""> Note: The values assigned during configuration for keyNumber, info and label are displayed. 4. In icon="", enter this data between the two quotation marks: COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 148 -...
Page 149
Backup and restore > Restore backup > Browse > choose stored file > Import. The icon for is replaced by the selected picture. Link to video (only in German) https://www.youtube.com/watch? v=lCEt-9Za3MA Further help in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 149 -...
• Settings > Identities > Options for experts > Security > SRTP Details about the settings are in Security Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 150 -...
Details about the settings are in Sync Process 1. Before you can start configuring an account, you must assign the authorisation to synchronise calendar entries and contacts. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 151 -...
Page 152
Synchronisation is performed in both directions. Entries created on the device are also visible, and can be used, on other end devices. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 152 -...
If you want to provide your specialised dealer or the manufacturer with the recorded data, for error analysis, you must ensure that the legal requirements are fulfilled. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 153 -...
Page 154
3. Stop the recording. 4. The file is saved automatically and displayed in the browser's downloads list. Contact Auerswald Support/ FONtevo Support, to arrange for it to be analysed. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 154 -...
Transferring calls Transferring calls Call transfer types Transfer the call with an announcement Transferring a call without an announcement Calling a 3rd internal subscriber COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 155 -...
• Transfer the call with an announcement • Transfer the call without announcement (blind transfer) • Calling a 3rd internal subscriber and connecting them to an active call partner COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 156 -...
To transfer a call, a query call is placed. The call is announced. The two call partners are connected with each other. Description of the operation under Transferring calls COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 157 -...
If the called subscriber does not pick up, the call returns to the caller's own phone (the phone rings) after 2 minutes (or as set on the PBX or at the provider). Description of the operation under Transferring calls COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 158 -...
This second subscriber is to be transferred to another subscriber. To do so, a third call is triggered and the second subscriber is connected to the third subscriber. The original, existing call continues. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 159 -...
Pass the content of this message on to the Service team if requested. Requirements for configuration • Address of the update server COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 160 -...
Page 161
1. Web interface: Press Start update Phone:Press the Install soft key as soon as the message that a new firmware version is available is displayed on the screen. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 161 -...
Page 162
Details about the settings are in Update Provisioning: Details about provisioning this function in the Auerswald DokuWiki Automatic update process It can take up to 60 minutes to perform an automatic update. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 162 -...
Page 163
Is automatic update is not enabled, the system only checks for a newer version of the firmware during this time period. If there is a newer version of the firmware, you are informed in a message on the screen. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 163 -...
Restrict the configuration for displaying and removing menu options. Display all menus. Displays menu options selected by the administrators. Exception: Permanent summary display of:Dashboard , Network. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 164 -...
Page 165
Change the password without delay. • Access Details about the settings are in Access Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 165 -...
PBX functions to the function key assignments. • Provisioning using the provisioning server URL The URL is required if provisioning is not performed using DHCP data or a redirect server. • SIP provisioning COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 166 -...
Page 167
Details about the settings are in Using provisioning Phone: • Settings > Using provisioning Details about the settings are in Using provisioning Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 167 -...
Page 168
− Provisioning with DHCP data − Redirect Server − Provisioning from PBX search − Provisioning server URL You can select combinations of these options. 2. Select Start provisioning. Provisioning is performed. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 168 -...
Page 169
SIP provisioning process (only in the web interface) • Switch on SIP provisioning. You will find more information on configuration via SIP messages and also the provisioning process in the Auerswald DokuWiki. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 169 -...
Details about the settings are in Voicemail App Process 1. Accept the terms and conditions 2. Create a new ICT system Enter this information: − Name (freely definable) − IP Address COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 170 -...
Page 171
− The app opens after you Save and log in. 4. If all the settings have been entered and are complete, simply select the ICT system and appropriate subscriber the next time you log in. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 171 -...
• COMtrexx VM • COMtrexx Advanced • COMtrexx Business In some PBXs, you will need to install another module (available as an optional extra) to run a voice mailbox: COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 172 -...
Page 173
• Settings > Identities > Options for experts > Function codes > Voicemail number Details about the settings are in Function codes Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 173 -...
• Image files with file format .png or .jpg • Max. file size 5 MB Configuration Phone: • Gallery app > picture > Set picture as Details about the settings are in Gallery COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 174 -...
Page 175
340 px 570 px 162 px 68 px A Status widget B Functions widget C Soft key bar: Covers the wallpaper image at a height of 68 px. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 175 -...
Using the COMfortel D-Wireless Bluetooth/Wi-Fi dongle, you can also operate the device on the Ethernet network without a physical connection. Requirement • COMfortel D-Wireless (EZC-5200BS) • Access data for a Wi-Fi network COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 176 -...
Page 177
B Direct PC connection via network cable C Headset socket D Receiver socket E Connection for optional USB devices. F USB port for a COMfortel D-Wireless (EZC-5200BS) Bluetooth dongle. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 177 -...
Page 178
Note: The Wi-Fi connection is automatically closed if the device is rebooted with an Ethernet cable plugged in. Details about the settings are in Wi-Fi Provisioning: Details about provisioning this function in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 178 -...
Page 179
6. The device is connected using Wi-Fi. The Wi-Fi icon is displayed in the status bar. Note: If you change between Wi-Fi and Ethernet, the IP address changes. 7. To close the link, deactivate the Wi-Fi connection. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 179 -...
Details about the settings are in XML Minibrowser Phone: • Settings > Function keys > XML Minibrowser Details about the settings are in XML Minibrowser Provisioning: Further help in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 180 -...
Page 181
Further help in the Auerswald DokuWiki COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 181 -...
Note: There are alternatives to the functions below. These alternatives have not always been listed: To create/end a connection Pick up the receiver Loudspeaker Headset reject a call Back COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 183 -...
Page 184
Information about the section Holding a call/Reconnecting from a call that is on hold Hold COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 184 -...
Incoming calls Incoming calls Accepting a call Pick up the receiver Headset Loudspeaker Rejecting a call Putting an accepted call on hold Hold Reconnecting an on-hold call Hold COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 185 -...
Further help under Call waiting Rejecting a call Further help under Call waiting Forwarding Transfer > Enter destination number > Loudspeaker Transfer > Enter destination number > COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 186 -...
Page 187
Call-Waiting Calls Transfer > Select a saved contact > Further help under Call waiting COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 187 -...
> You have missed calls. Select from the displayed status bar > Select phone number/contact. Further help under Missed calls Dialling from within the redial list (outgoing) > OUTGOING > All > Select phone number/contact COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 188 -...
Page 189
Note: If more than one number is stored for a contact, you can select the number to call before you pick up the receiver. Further help under Contact COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 189 -...
Press the key with the Speed dialling function assigned to it to pick up the call. Muting a call Microphone Switching off muting To do this, press Microphone again COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 190 -...
Page 191
To do this, hang up the receiver Further help under Call Sending a DTMF signal during a call To do this, enter digits and special characters Further help under Call COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 191 -...
Further help under Query Calls Splitting a call (during a query call) Select the call partner to whom you want to change > Further help under Query Calls COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 192 -...
Page 193
> Further help under Query Calls Connecting the two call partners to each other To do this, hang up the receiver Further help under Query Calls COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 193 -...
Transfer the call without announcement (blind transfer) Proceed as follows: Hold > enter destination number/contact > OK > Further help under Transferring a call without an announcement COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 194 -...
Further help under Conference call Connecting the other two conference call partners to each other Further help under Conference call Splitting a conference call COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 195 -...
Page 196
Then, there will only be a connection with the remaining subscriber. Further help under Conference call Ending a conference call completely To do this, hang up the receiver Further help under Conference call COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 196 -...
Select the phone number > wait for a short while Requirement: Automatic start of callactivated. Further help under Automatic start of call Further help under Hands-free calling mode Ending a call in hands-free calling mode COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 197 -...
Page 198
Hands-Free Calling Loudspeaker Further help under Hands-free calling mode COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 198 -...
Loudspeaker Further help under Loudspeaker listening mode Ending a call in loudspeaker listening mode To do this, hang up the receiver Further help under Loudspeaker listening mode COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 199 -...
Personally initiating a call when headset operation is switched on (headset LED is shining green) Headset Further help under Headset mode Transferring an active call to the headset Headset COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 200 -...
Page 201
Further help under Headset mode Cancelling the listen-in function on the receiver during a headset call To do this, hang up the receiver Further help under Headset mode COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 201 -...
To list outgoing calls > OUTGOING Redialling Further help under Caller list Options for displaying entries in an active list (hold down the key for approx. 2 sec. .) COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 202 -...
Page 203
Deleting an entire call history Delete (hold down the key for approx. 2 sec. .) Further help under Caller list Calling from an opened call history Pick up the receiver COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 203 -...
Page 204
Calls Loudspeaker Headset Further help under Caller list To leave the call history Back Further help under Caller list COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 204 -...
When you press the flashing function key, you pick up the call. When speed dialling is not set up Home > enter pick-up code and phone number of the internal phone > COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 205 -...
Page 206
Pick-Up Pick up the receiver Further help under Pick-up during a call COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 206 -...
LEDs). You can operate it using the keys or touch controls. Keys and LEDs on the basic unit 1. Touch display 2. Dedicated function keys 3. Casing LED COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 208 -...
Page 209
6. Back 7. Home 8. Delete 9. Proximity sensor, Brightness sensor 10. Keypad A Microphone B Hold C Transfer D plus E Headset F Loudspeaker G minus COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 209 -...
Page 210
Front View H Redialling Messages Keys and LEDs on the key extension module A Function keys (10x on each side) B control rocker COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 210 -...
The next figures show the connections on the bottom of the different devices. ® COMfortel D-600 A Network port B Direct PC connection via network cable C Headset socket D Receiver socket COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 211 -...
Page 212
H Power supply via COMfortel ® D-XT-PS USB port, exclusively for connecting a COMfortel D-XT20/D-XT20i key extension module. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 212 -...
Page 213
(if you connect two or more key extension modules) B USB port (e.g. for connecting another COMfortel D-XT20/D-XT20i key extension module) C Micro-USB port: use this to connect the telephone to the key extension module COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 213 -...
Using the Web Interface Basic Knowledge Dashboard Display and LED Function keys Using provisioning Identities Cameras Update Network LDAP Telephony Sound Date and time User Backup and restore Access COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 214 -...
− Password: admin Caution: Passwords that are unchanged from the factory settings are a security risk. Change the password in the dialogue without delay. 3. Click on Login. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 216 -...
Page 217
Opening the web interface You are now logged into the web interface and can make settings. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 217 -...
Here, click on the required topic to select it. C Display or hide vertical navigation. If the menu structure on the left is being displayed, a vertical navigation is displayed. D Breadcrumb navigation COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 219 -...
Page 220
E Context-sensitive help F Content area The topic selected using the vertical navigation is displayed here. G Displays or hide the help system. H Help system Save COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 220 -...
[ ] square brackets { } curly brackets Active text input field. Text input field that is already filled. Text input field that is locked for processing. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 221 -...
Page 222
The position of the slider identifies where the setting is. Drag the slider to the left to reduce the value. Drag the slider to the right to increase the value. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 222 -...
Note: If the web interface is not legible because of scaling/zooming of the browser, you can restore the original view (e.g. Mozilla Firefox under View > Zoom > Normal or Ctrl + 0). COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 223 -...
Displays the update system version in use on your device. Bootloader version Displays the bootloader version in use on your device. Serial number Displays your device's serial number. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 225 -...
Page 226
If the phone malfunctions, a log can be recorded. It can then be sent to the technical departments (Service, Development) so that the cause of the fault can be investigated. Further help under Trace COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 226 -...
Page 227
Here, you can display the following license information: • End User License Agreement for Software (EULA) • Data protection • Open source licenses • Licenses system webview COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 227 -...
Audio frequencies (pitches, pulse/pause characters and/or ringing tones), and also the time and time format, are different for each selected location. Further help under Language and location COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 228 -...
Device name Device name Device name The name you assign to the device. Further help under Device Information COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 229 -...
Display and LED Display and LED Basic Settings Key extension modules Options for experts LED notifications COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 230 -...
Brightness Sets the brightness. Note: Any changes you make to the brightness affect on all key extension modules that are connected. Further help under Display and LED COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 231 -...
Key extension modules Show icons on D-XT20(i) Switches on the display of icons and images on all connected key extension modules. Further help under Display and LED COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 232 -...
Display and LED Keypad brightness Sets the brightness of the illuminated keypad if "Manually" mode is selected. Further help under Display and LED Keypad backlight mode Manually COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 233 -...
Page 234
If the ambient light is very bright, the keypad brightness is switched off. Further help under Display and LED COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 234 -...
Notifications menu. Further help under Display and LED Heard voice messages Sets the message key LED's reaction to heard voice messages. • LED lights up COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 235 -...
Page 236
Controls the behaviour of the message key LED. If this option is deselected, the message key LED are switched off permanently. Further help under Display and LED COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 236 -...
System icons B Enter text such as under Edit function keys > Key label C Function selected as under Edit function keys > Function D Seq. Number COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 238 -...
Page 239
B Lists all 3 possible levels to which a function can be assigned C Display D Level 1 (always visible) Click on the selected key to open the Edit function keys window COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 239 -...
Page 240
Click on the selected key to open the Edit function keys window Note: If a key already has a function assigned to it, the LED shines orange. You can assign a different function. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 240 -...
Details about the settings are in Edit Icon Key label Displayed beside each function key on the screen. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 241 -...
Page 242
Reset all levels Deletes the functions assigned to the key on all levels. Cancel Closes the menu without adopting changes. Save Saves the entered parameters and close the window. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 242 -...
CF ext. calls: On busy CF ext. calls: On no reply Do not disturb DTMF-Relay Group Group (incoming) Group (outgoing) Park position Relays Silent Alert XML Minibrowser COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 243 -...
Note: Pickup should not be used if the key is only used to switch functions in the PBX using a programming code. Deactivate Pickup in that case. Further help under Pick-Up COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 244 -...
Page 245
Signalise missed call If this function is enabled, missed calls associated with the speed dial number are signalled with flashing green LEDs. Further help under Speed dial COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 245 -...
Identity Identity Identity Identity used to trigger subsequent calls. Further help under Identities COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 246 -...
Identity Identity for which this function is set up. Further help under Identities Configuration id The PBX assigns the configuration ID automatically. Further help under Function templates COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 247 -...
Anonymous call Anonymous call No parameters necessary. Further help under Anonymous call COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 248 -...
Identity for which this function is set up. Further help under Identities Identification number for system relay with Automatic configuration switchover operating mode (900, in the factory settings). Further help under Function templates COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 249 -...
Bluetooth Bluetooth No parameters necessary. Further help under Bluetooth COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 250 -...
Identities Note: Only assign the Identity parameter if PBX function templates are used. Further help under Function templates Destination Call forwarding destination Further help under Call forwarding COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 252 -...
Identities Note: Only assign the Identity parameter if PBX function templates are used. Further help under Function templates Destination Call forwarding destination Further help under Call forwarding COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 253 -...
Identities Note: Only assign the Identity parameter if PBX function templates are used. Further help under Function templates Destination Call forwarding destination Further help under Call forwarding COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 254 -...
Call waiting Call waiting No parameters necessary. Further help under Call waiting COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 255 -...
PBX configuration), for which call forwarding is to be performed. PTP connection:Header plus extension for which call forwarding is to be performed. Destination Call forwarding destination Further help under Function templates COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 256 -...
PBX configuration), for which call forwarding is to be performed. PTP connection:Header plus extension for which call forwarding is to be performed. Destination Call forwarding destination Further help under Function templates COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 257 -...
PBX configuration), for which call forwarding is to be performed. PTP connection:Header plus extension for which call forwarding is to be performed. Destination Call forwarding destination Further help under Function templates COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 258 -...
Do not disturb Do not disturb Identity Identity for which this function is set up. Further help under Identities Further help under Do not disturb COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 259 -...
DTMF-Relay DTMF-Relay DTMF sequence Numbers needed to perform the required function. Further help under Function templates COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 260 -...
Group Group Identity Identity for which this function is set up. Further help under Identities Group Group telephone number Further help under Function templates COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 261 -...
Group (incoming) Group (incoming) Identity Identity for which this function is set up. Further help under Identities Group Group telephone number Further help under Function templates COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 262 -...
Group (outgoing) Group (outgoing) Identity Identity for which this function is set up. Further help under Identities Group Group telephone number Further help under Function templates COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 263 -...
Park position Park position Number/URI Phone number of the park position. Identity Identity for which this function is set up. Further help under Park position COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 264 -...
This function key is not suitable for manual relays. For additional Information, refer to the Advanced Information about the PBX. Further help under Function templates COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 265 -...
Caution: The function can only be executed if the appropriate URL has been entered. Delay Countdown counter. The alarm is triggered after the countdown reaches zero. Further help under Silent Alert COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 266 -...
XML Minibrowser XML Minibrowser Number/URI Web server address Further help under XML Minibrowser COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 268 -...
Function keys Download Saves the icon locally with a size of 64 x 64 px asicon.png. Further help under Function keys Applies the icon for these views: COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 269 -...
Page 270
Tool for adjusting the icon's image size and screen window. Further help under Function keys Icon Preview Displays a preview of the final icon. Further help under Function keys COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 270 -...
The phone obtains the provisioning server's URL from the redirect server. Further help under Using provisioning Provisioning from PBX search Automatic provisioning of the phone is performed via the PBX. Further help under Using provisioning COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 272 -...
Page 273
Basic Settings Provisioning server URL This URL is required if it is not obtained via DHCP or a redirect server. Further help under Using provisioning COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 273 -...
Note: After a reboot, a random time between 00:00 and 05:00 is entered for provisioning. This prevents load spikes on the server. Further help under Using provisioning COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 274 -...
SIP provisioning SIP provisioning SIP provisioning Starts remote configuration using SIP messages. Further help under Using provisioning COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 275 -...
Additional function templates Additional function templates Vendor templates Activates templates and scripts that are specially designed to run on Auerswald/FONtevo PBXs. Further help under Function templates COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 276 -...
D Identity incorrectly configured, unregistered and unencrypted E Activate/deactivate an identity F Identity deactivated G Resets the selected identity H SIP Registrar Display name SIP Username K Status Active COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 278 -...
Used to verify the user name. Identical to the password assigned by the VoIP provider when the identity was being created or the password entered in the PBX. Further help under Identities Display name Freely selectable name. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 279 -...
Page 280
Enter the authentication username provided by the VoIP provider. You need the authentication username when you register with a VoIP provider. If you connect to an Auerswald PBX, you do not need to enter the authentication ID. Further help under...
Area in the From header in which the VoIP provider expects to receive number presentation suppression. Selection as set in the PBX/at the provider. Anonymous The sent display text in the From header is "anonymous". COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 281 -...
Page 282
If a connection or call is on hold, the "music on hold" is played. Further help under Music on hold IP version IPv4 Sets IPv4 for the registrar. IPv6 COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 282 -...
Page 283
PBX, external VoIP subscriber) does not support encryption, the connection is not established. Further help under SRTP SIPS Activates the transmission of encrypted SIP messages over TLS for connections with this identity. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 283 -...
Page 284
Switches on the check after a connection for a call that is still in existence. Note: When the SIP session timer is switched on, this may result in the call being interrupted more frequently after the specified interval, if COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 284 -...
Page 285
Further help under Important: If encryption using SIPS is enabled, the TCP transport protocol is used. Manual settings are overwritten. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 285 -...
Page 286
The set number of seconds doubles after each attempt to subscribe on the PBX/provider. Further help under Retry subscriptions: Interval in seconds Sets the time gap between two subscription attempts. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 286 -...
Page 287
PBX/provider. Further help under Retry register: Interval in seconds Sets the time gap between two subscription attempts. Minimum: 1 sec Default: 10 sec Further help under COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 287 -...
You can select inactive codecs and drag & drop them in the "Active" list to arrange them, or remove them from the list. Further help under Codecs COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 288 -...
Caution: Each time a port is opened on the router, this creates a potential security risk. It is essential you put additional protective measures in place. Further help under Identities COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 289 -...
Page 290
The value you enter here should be a compromise between a short timespan (which generates traffic with the provider) and a long re- registration period. Further help under Identities COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 290 -...
The router which connects the local area network with the Internet should be a properly functioning SIP-aware router which performs NAT traversal. Further help under RTP NAT traversal Requirement: COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 291 -...
Page 292
As a rule, this is reported with error message 503 during SIP registration. If this problem occurs, it is recommended to raise the value (e.g. to 180). Further help under Identities COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 292 -...
Page 293
Enable the best possible transmission route to be found between the phone and PBX/provider. Note: ICE must only be activated if the other end supports ICE. Further help under Identities COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 293 -...
Further help under Outbound proxy Server address for the outbound proxy. Note: The URL must be filled out if mode Manually is selected. Further help under Outbound proxy COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 294 -...
Page 295
Alternative URL Alternative server address for the outbound proxy. Further help under Outbound proxy Alternative port Alternative port for the outbound proxy. Further help under Outbound proxy COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 295 -...
Camera management Camera management A Unique name, as assigned under Name B Name, entry required COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 297 -...
Page 298
K View and edit the password Changes the refresh rate settings in increments of 10 ms M Deletes the camera from the list N Adds a new camera to the list COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 298 -...
Refresh rate in ms Select the refresh rate: at least 100 ms. Note: The value for the images actually transferred depends on which type of camera is used. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 299 -...
Page 300
Enter the password, if necessary. Further help under Cameras Use for incoming calls only The camera image display is only activated for incoming calls. Further help under Cameras COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 300 -...
Further help under Update Update server URL In the default settings: https://update.auerswald.de Further help under Update Start update Starts installation of a new firmware version. Further help under Update COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 302 -...
Resets the telephone to the factory settings. Any saved data and settings are deleted. The phone is shut down and then restarted. Further help under Reset to default COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 303 -...
The weekdays on which the phone checks for available updates and installs them. Further help under Update Time Time at which the phone checks for available updates and installs them. Further help under Update COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 304 -...
Displays the phone's IP address. Prefix Different subnet mask notation. Example: 24 corresponds to 255.255.255.0 Forwarding routes Protocol Shows which network protocol is being used by the forwarding route. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 306 -...
Page 307
If only one router is in use, the DNS's IP address is the same as that of the gateway. If more than one server is being used to handle these tasks, the IP addresses will be different. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 307 -...
If you select Static: you can enter/change the phone's IP address In the factory settings: 0.0.0.0. Further help under IPv4 Subnet mask Example: 225.255.255.0 Further help under IPv4 COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 308 -...
Page 309
DNS server. The provider or network system administrator sets the DNS server. Further help under IPv4 DNS 2 Optional Further help under IPv4 COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 309 -...
The DNS server is needed for Internet access. The provider or network system administrator sets the DNS server. The provider or network system administrator sets the DNS server. Further help under IPv6 COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 310 -...
Page 311
IPv6 DNS 2 Optional Further help under IPv6 COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 311 -...
Phone VLAN priority 0 (lowest priority) to 7 (highest priority) Further help under VLAN PC port VLAN Switches on VLAN for the PC port. Further help under VLAN COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 312 -...
Page 313
The associated data packets are tagged with this ID. Further help under VLAN PC port VLAN priority 0 (lowest priority) to 7 (highest priority) Further help under VLAN COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 313 -...
OpenVPN libraries are used to set up a VPN over an encrypted TLS/SSL connection. L2TP IPsec PSK IPsec variant performed using the Layer 2 Tunneling Protocol. Authentication is performed using a shared secret and a personal secret. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 314 -...
Page 315
Further help under User name User name for the VPN connection. Your network administrator will give you your user name. Further help under Password Password for the VPN connection. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 315 -...
Page 316
Your network administrator will give you the IP address range for the forwarding routes. Further help under IPsecIdentifier Caution: IPsecIdentifier settings can vary greatly, depending on which server is in use. The network administrator must predefine the configuration. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 316 -...
Page 317
This is generated by the system administrator or by the user. The private key must fulfil these criteria: • X.509 standard • .pem format Further help under IPsecCaCert Acts as a "trust anchor" for the connection. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 317 -...
Page 318
• X.509 standard • .pem format Further help under OpenVPN Config Contents of a configuration file (openvpn.cfg). Component part of setting up an open VPN. Further help under COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 318 -...
Ends the sending of RTP packets if no active conversation is taking place. Note: If this function is switched on, parts of the call can seem like breaks in the connection because background noises are cut off sharply. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 320 -...
Page 321
LLDP-enabled switch. Further help under LLDP LLDP: Interval in seconds LLDP package sending frequency 30 to 3600 sec Minimum: 30 sec Default: 30 sec Further help under LLDP COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 321 -...
Min. prefetch Minimum prefetch delay (msec). Default: 60 msec Further help under Jitter buffer Max. prefetch Maximum prefetch delay (msec). Default: 240 msec Further help under Jitter buffer COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 322 -...
Page 323
Jitter buffer Maximum Delay that can be set for the jitter buffer (msec). Default: 360 msec Further help under Jitter buffer COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 323 -...
E Deletes the selected STUN server. F Adds another STUN server to the list. The list is dynamic. Settings can be made for up to eight STUN servers. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 325 -...
Note: If you encounter problems with half-open (dropped) call connections, enabling the RTP port might help. Further help under Topology Time lapse registration (min.) 5 … 60 minutes COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 326 -...
Page 327
The value you enter here should be a compromise between a short timespan (which generates traffic with the provider) and a long re- registration period. Further help under Topology COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 327 -...
LDAP via SSL technology, Port 636. Active Switches on the directory service request. Further help under LDAP Server The LDAP server's domain name or IP address Further help under LDAP COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 329 -...
Page 330
Note: You can find the password in the web interface of your PBX underUser data > Address Books > Settings in the row Simplified user name next to Password. Further help under LDAP COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 330 -...
Page 331
Basic Settings Search area Point in the folder from which the LDAP search starts. Example: BaseDN dc=auerswald Further help under LDAP COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 331 -...
Filter for assigning numbers to names for incoming and outbound calls. Further help under LDAP Number filter dial preparation Filter for displaying the suggestions list in dial preparation. Further help under LDAP COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 332 -...
Page 333
Further help under LDAP Phone number attributes Relevant phone number attributes. Further help under LDAP Sort by Sorting algorithm (by First name, by Last name) Further help under LDAP COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 333 -...
Page 334
Further help under LDAP Number search outgoing If "Number search outgoing" is enabled, the display name is searched for via LDAP, for outgoing calls. Further help under LDAP COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 334 -...
Do not disturb Rejects calls to the phone. Call Completion The callback is triggered automatically by the PBX. Further help under Call Completion COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 337 -...
Waiting time before call starts in s Shows the number of seconds the device will wait before starting the call to the specified destination. Further help under Direct call COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 338 -...
Seconds until start of call You can use the sliding adjuster to set the number of the seconds that the phone waits before making the automatic call. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 339 -...
Forwards incoming calls to the set destination number if these calls have not been taken within a set time. Further help under Call forwarding Call forwarding destination Enter the destination number here. Further help under Call forwarding COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 340 -...
Page 341
Call forwarding Waiting time before call forwarding Sets the number of the seconds that the phone waits before activating call forwarding. Further help under Call forwarding COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 341 -...
Activates the logging of incoming and outgoing calls. Note: If the function is switched off, calls cannot be started by redialling the number. Further help under Log calls COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 342 -...
Uses a tone to signal incoming calls. Further help under Automatic call acceptance Interrupt active calls Active calls are put on hold when InterCom calls are received. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 343 -...
Page 344
Automatic call acceptance Note: For active calls to be interrupted, the Call waiting function must be enabled. Further help under Automatic call acceptance COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 344 -...
55, 551, 552, 553 and 554. A camera image would not be displayed for: − phone numbers with more than 3 digits − phone numbers that do not start with 55 COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 345 -...
Page 346
Select the camera whose images are to be displayed. Further help under Cameras Softkeys | key 1/2 Selects a configured function key. Further help under Call bindings COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 346 -...
Invite. Six names are predefined by default. Further help under Sound Ringtones by call type List of possible ringtones. Assign a ringtone to a call type here. Further help under Sound COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 348 -...
Note: Max. permitted file size per file: 5 MB. Further help under Sound Memory utilisation Displays how much memory is occupied by imported ringtones. Further help under Sound COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 350 -...
Settings Settings Silence on user proximity Switches Silence on user proximity on. Further help under Gesture control COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 351 -...
Data on the phone that has a time stamp (such as call history entries, calendar entries and e-mails) is displayed with the correct time. Further help under Date and time COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 352 -...
Page 353
12 h: time display in 12-hour format. In addition, the time range AM/PM is displayed. 24 h: time display in 24-hour format. Further help under Date and time COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 353 -...
G Stores all settings for a user. H Click on the Edit icon to assign a new password. Displays/hides the currently set password (only in Edit mode). COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 355 -...
Page 356
User administration Adds a new user to the list. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 356 -...
• contain at least one lower case letter • contain at least one special character • be at least 9 characters long • be different from the user name Further help under Passwords COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 357 -...
Page 358
Admin Assigns administrator rights to the user. Note: Administrator rights can only be assigned when a new user is created. Further help under User roles and permissions COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 358 -...
• Import: Uploads the settings from the selected .xml file to the phone. Further help under Backup and restore COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 359 -...
Android Debug Bridge (adb) Enables the PC to access the phone via the software interface. You can then use ADB to execute commands on the Android system. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 362 -...
Required to send events. No entry required if only commands are received. Further help under Action URL Generate new token Provides a static password for the phone interface. Further help under Action URL COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 363 -...
Logging Logging Extended Logging Enables debug info recording. Note: In some situations, extended logging can have a negative impact on system performance. Further help under Logging COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 364 -...
For users, the reduced display is applied both to the phone and the web interface. Note: Only administrators can see this page. Further help under User roles and permissions COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 365 -...
Drag from the top edge of the display to display notifications. If you drag again, the brightness adjustment slider is displayed. Diagonally (zoom in/out) COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 368 -...
Page 369
• The device awakes from idle state. • Silence the ring signal for an incoming call. • Silence the call waiting tone during an active call. Further help under Display and LED COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 369 -...
Display Display Display overview Status Line Status widget Status bar Function keys System icons Entry and Selection Fields Virtual keyboard Navigation in menus COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 370 -...
Display overview Display overview Home Varying display names All call lists Incoming calls Active conversation Putting a conversation on hold Call forwarding Conference call Transfer Call bindings COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 371 -...
A Calendar week B Status Line C Date D Status widget E Time, system icons F Touch function keys G Add additional touch function keys H Soft icon Contacts COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 372 -...
Page 373
Home Soft icon Call list Soft icon Menu K Soft icon New messages Soft icon New Calls M ME Contact COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 373 -...
− Primary username = ME contact − Device name B Possible displays (sequence indicates priority): − Display name as assigned in Identities − SIP username@SIP registrar (xxxx@xxx.xxx.xxx.xxx) COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 374 -...
Page 375
Varying display names − No WebUI (if web administration (https) is deactivated and no identity has been configured) − IP address (if device is connected but not registered) COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 375 -...
D Status bar: Displays the date, time and, if required, other system icons E Displays a list containing these options: − Call details − Edit number before call COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 376 -...
Page 377
2 seconds and confirm the screen message you see next with OK . Press Back to leave the call history Details about the settings are in Display COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 377 -...
Feature level 2 or above (device is operating on a COMtrexx) or after the D-series convenience package has been activated (device is operating on an Auerswald/FONtevo PBX). COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 378 -...
Page 379
Incoming calls Internal A Contact profile B Call duration C Caller name D Caller phone number E Identity F Own called identity G Reject H Accept COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 379 -...
Page 380
E Identity F Own called identity G Exchange H Name of the called exchange line number If no name has been assigned: Display the called number. Reject COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 380 -...
Page 381
D Caller phone number E Group F Name of the called group G Exchange H Name of the called number If no name has been assigned: Display the called number. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 381 -...
Page 382
A Displays the camera image that is transferred from the door terminal B Contact profile C Call duration D Door name E Door phone number F Identity G Own called identity COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 382 -...
Page 383
For the relay function key, set up for the door call (e.g. Open the door, switch on light) Accept Forwarded call A Contact profile B Call duration C Caller name D Caller phone number E Identity F Own called identity COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 383 -...
Page 384
Call forwarding Use the Call forwarding function to forward calls independently of the current situation (immediately, on busy or on no reply). Further help under Call forwarding COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 384 -...
Active conversation between 2 SUBs A Contact profile B Conversation duration C Identity SUB 1 D Subscriber number SUB 1 E Identity F Identity 2 G Hang up COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 385 -...
D SUB subscriber number put on hold E Identity F Own identity G Hang up H Changes to the view from which another SUB can be called COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 386 -...
Page 387
D Call duration E Enter the subscriber number to call a different subscriber F Note text G Trigger a call H Toggle between numerical and alphanumeric entry COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 387 -...
D Subscriber number of the identity to which the call is transmitted E Identity F Own identity G Redirected via H Redirecting identity with phone number display Hang up COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 388 -...
Page 389
C Duration of the call to be forwarded D Note text E Call forwarding destination entry Suggested contacts, each consisting of: F Contact profile G Identity name H Identity subscriber number COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 389 -...
Page 390
F Own identity G Hang up H Connect partner Press the soft key to forward the call without announcement Contact profile of the call to be forwarded COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 390 -...
Page 391
Call forwarding Duration of the call to be forwarded K Identity of the call to be forwarded COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 391 -...
B Duration of active conversation C Identity of the active conversation D Subscriber number of active conversation E Identity F Own identity G Hang up H Conference call setup Connect partner COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 392 -...
Page 393
B Contact profile, conference call participant 2 C Identity, conference call participant 2 D Subscriber number, conference call participant 2 E Conference call duration F Own identity G Disconnect conference call COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 393 -...
A Contact profile of active participant B Transfer target contact profile C Transfer target subscriber number D Transfer status display E Subscriber number of active participant F Identity of active participant COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 395 -...
It provides additional options, in this case, opening a door using the Relay function key Relays F These must be present, to display a camera image: COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 396 -...
Page 397
Call bindings − An IP camera with a valid URL. − A call that is connected to the IP camera. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 397 -...
Status Line Status Line The telephone's status line displays the following information: • Calendar week • Date • Time COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 398 -...
• Avatar or profile picture • Device type • Contact name as assigned in Contacts > ME • Display name as assigned in Identities • Missed calls • Voice messages COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 399 -...
• swipe from the bottom edge of the display to the top • Press the Back button The status bar tells the user about the telephone's status at any time. A Time B Date COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 400 -...
Page 401
• Press and hold the notification • Swipe the notification to the left or right, to display the Settings icon Selection of the Settings icon opens the menu. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 401 -...
COMfortel D-XT20/D-XT20i key extension modules (not included in the scope of delivery). Modules are attached to the right-hand side of the phone. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 402 -...
Page 403
You can see the current key level on the horizontal scroll bar at the top and bottom edge of the display. The display content changes according to the selected key level. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 403 -...
Function key: Activate config Function key: Do not disturb Function key: Group Function key: XML Minibrowser Function key: Silent Alert Function key: VPN Function key: Relays Function key: Park position COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 404 -...
Page 405
Do not disturb enabled Incoming call Duration of an active call Active call Call on hold Call Completion Headset Bluetooth Accepted call Missed call Outgoing call Unsuccessful outgoing call COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 405 -...
Page 406
Switch to numerical entry Switch to alphanumeric entry Forward call Successful forwarding of a call Failure to forward a call Accepts a call Reject a call/hang up Search COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 406 -...
Page 407
Status icon: New message Status icon: Missed call Update No account Warning Setting the volume Call details Edit number before call Add contact Delete from list Open list Close list COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 407 -...
Page 408
System icons Identity registered, unencrypted Identity registered, encrypted Identity unregistered Identity not configured COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 408 -...
The further the slider is to the left, the lower the value that is set. The further the slider is to the right, the higher the value that is set. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 409 -...
E SELECT ALL Selects the entire text in the entry field. F Shift key Switches between upper and lowercase letters. G Changes between numerical and alphanumeric entry. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 410 -...
Page 411
Confirms the entry and returns to the main menu. Display/hide the screen keyboard You can display or hide the screen keyboard as required for text entry fields. For this, press for approximately 2 seconds. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 411 -...
A Menu option at the highest level (start) B Menu option between the highest and lowest level C Menu option at the lowest level (destination) COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 412 -...
Select to open the list Calls > Missed. A new voice message The mailbox is called and the dialler is displayed. Follow the spoken instructions to find out what to do next. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 413 -...
Keys and LEDs Keys and LEDs Keypad Dedicated function keys Delete, Home and Back Directional pad and OK LED signalling on function keys Casing LED Changing the input mode COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 414 -...
• LED is flashing green: incoming call • LED is shining red: active hedaset call Transfer without LED • You can transfer calls with or without prior notification. minus COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 416 -...
Page 417
• LED flashing red: loudspeaker listening is enabled • LED is shining red: hands-free calling is enabled plus • Increases the volume of the ringer, receiver, or loudspeaker, depending on operational state. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 417 -...
• Press this to display the home screen. Previously started actions will continue in the background. Back • Press this to return to the most recently opened menu and end the current action. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 418 -...
Use the directional pad direction keys to start operation and activate required elements in lists and menus. By pressing OK the activated element is selected and the element's function is executed. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 419 -...
Missed call from speed dial green number No active calls or conversations Flashing Sending subscription to PBX yellow Shining Subscription failed yellow Identity Shining Active, registered identity, default green identity COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 420 -...
Page 421
Flashing Current attempt to register the yellow * function key on the PBX/provider, using SIP Subscription Shining Error yellow * Anonymous call Shining Function enabled green COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 421 -...
Page 422
Shining Function enabled no reply green Function key configured, function deactivated Flashing Time gap between pressing green * the function key and acknowledgement by the PBX/ provider COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 422 -...
Page 423
* function key on the PBX/provider, using SIP Subscription Shining Error, function key perhaps not yellow completely configured Shining Function enabled green Flashing Establishing VPN connection yellow COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 423 -...
Page 424
Login process green Flashing Sending subscription to PBX yellow Shining Subscription failed yellow CF ext. calls: On Shining Function enabled Busy * green Function key configured, function deactivated COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 424 -...
Page 425
PBX/ provider Flashing Current attempt to register the yellow function key on the PBX/provider, using SIP Subscription Shining Error, function key perhaps not yellow completely configured COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 425 -...
Page 426
Park position Shining red Call in the internal park zone Free park position From device version COMfortel® D-400 Browser None Calls the set page in the browser COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 426 -...
Page 427
LED signalling on function keys Function Status display Bluetooth Bluetooth not active Shining Bluetooth active green Shining Error: maybe no Bluetooth dongle yellow inserted COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 427 -...
Casing LED Casing LED The Casing LED indicates the following statuses: • Flashing red (quickly): incoming call • Lit in red: active call COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 428 -...
If you want to use the keypad to enter data in fields, press and hold (for approx. 2 seconds) to toggle the input mode (abc < > 123) COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 429 -...
Opens the calendar with the dates overview. You can enter new dates or a series of dates. Displays the contact list. Runs an app for listening to and managing music. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 431 -...
Page 432
Runs an app for synchronising contacts and calendar entries. Displays the call list. Runs an app for showing the time on the display. You can also activate an alarm clock or use a stopwatch function. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 432 -...
Caution: Apps and files downloaded from the Internet may contain viruses which can damage your telephone. To protect your telephone and your personal data, we strongly recommend you only install apps and files from trustworthy sources. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 433 -...
Lists all calls, sorted chronologically. Missed Press this to list all missed calls by how recent they are. Outgoing Press this to list all outgoing calls by how recent they are. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 435 -...
• Time • Conversation duration Edit number before call Displays the previously selected phone number. You can then modify the number by selecting: • Delete • Complete COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 436 -...
Page 437
1. Select an entry in the call history. 2. By pressing OK for approximately 2 seconds. The options as described are listed. 3. Select any required options. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 437 -...
Deletes one or more contacts. To delete a single contact, follow these steps: 1. Tap on the contact to open it. All the data stored for the contact is displayed. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 439 -...
Page 440
Displays a search field. Use the screen keyboard that is now displayed to search for names, parts of names or numbers. Add Contact Changes the menu, so you can create a new contact. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 440 -...
• screen keyboard. You can then display or edit more details for the e-mail address. Other fields Enter more information for the contact using the • Keypad COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 441 -...
Page 442
Edit Contact • screen keyboard. You can then display or edit more details for the contact. Save Saves the contact data locally in the telephone. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 442 -...
Background:The selected image is used as the wallpaper in the display. • Contact photo:The selected photo is assigned an icon from the contact list. Further help under Wallpaper COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 443 -...
Details about the settings are in Add ICT system Note: If an account for an existing system is found, the login parameters (Name, IP Address, Port) are pre-filled with values. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 447 -...
Save and add user Saves the settings that have been made and switches to New User. Details about the settings are in Add subscriber COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 448 -...
Note: A password can only be assigned if the Save credentials function is active. Save and log in Saves the settings that have been made and opens the app. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 449 -...
These options are available: • Remove only from phone • Remove from phone and from PBX Details Displays more information about the selected message: • Name • Number COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 452 -...
Page 453
• Is New Mark as read/unread Note: Unread messages are displayed in colour in the overview. Further help under Voicemail App Back Returns to the higher level menu. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 453 -...
Removes the selected message from the overview. These options are available: • Remove only from phone • Remove from phone and from PBX Details Displays more information about the selected message: • Name COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 454 -...
Page 455
• Is New Mark as read/unread Note: Unread messages are displayed in colour in the overview. Further help under Voicemail App Back Returns to the higher level menu. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 455 -...
Note: Configure the Voicemail Box in the ICT system. You will find more detailed information in the Instructions for your PBX. Back Returns to the higher level menu. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 456 -...
• Free Space (MB) • Manufacturer ID • Name • OEM ID • Revision • Total Space (MB) • Type • Valid • Read-only Further help under Voicemail App COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 457 -...
Synchronize Synchronize Starts comparing the telephone settings with the settings in the ICT system. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 458 -...
App Info App Info Provides information about the app version. Displays the software license contract. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 460 -...
Synchronises when the display is switched on, but not more frequently than 1x every 5 minutes. Default: deactivated Data service settings Select the data service that is used for synchronisation: • Use cellular networks COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 462 -...
Page 463
Note: Deletes all contacts and calendar entries associated with this account, on the device. Further help under Sync Import contacts Imports addresses for the selected account. Further help under Sync COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 463 -...
• Report connection errors • Log to file Further help under Sync Displays this information: • The current app version • Support • Contact Further help under Sync COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 464 -...
Settings Network Identities Bluetooth Wi-Fi Sound Language and location Display and LED Telephony Function keys Camera Update Using provisioning Access Apps Date and time Contacts/LDAP About phone COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 465 -...
If you select Static: you can enter/change the phone's IP address In the factory settings: 0.0.0.0. Further help under IPv4 Subnet mask Example: 225.255.255.0 Further help under IPv4 Gateway Example: 192.168.178.1 COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 468 -...
Page 469
DNS server. The provider or network system administrator sets the DNS server. Further help under IPv4 DNS 2 Optional Further help under IPv4 COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 469 -...
DNS server. The provider or network system administrator sets the DNS server. Further help under IPv6 DNS 2 Optional Further help under IPv6 COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 470 -...
VLAN PC port VLAN ID Enter the PC port's VLAN lD: 1 … 4094 The associated data packets are tagged with this ID. Further help under VLAN COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 471 -...
Page 472
VLAN PC port VLAN priority 0 (lowest priority) to 7 (highest priority) Further help under VLAN COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 472 -...
Your network administrator will give you your user name. Further help under Password Password for the VPN connection. Your network administrator will give you the password. Further help under COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 473 -...
Note: The value must lie between Min. prefetch and Max. prefetch. If the Initial value = 0, prefetch is deactivated. Min. prefetch: Minimum prefetch delay (msec). Default: 60 msec Max. prefetch: Maximum prefetch delay (msec). Default: 240 msec COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 475 -...
Page 476
LLDP-enabled switch. Further help under LLDP LLDP: Interval in seconds LLDP package sending frequency 30 to 3600 sec Minimum: 30 sec Default: 30 sec Further help under LLDP COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 476 -...
Note: If you encounter problems with half-open (dropped) call connections, enabling the RTP port might help. Further help under Topology Time lapse registration (min.) 5 … 60 minutes COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 477 -...
Page 478
The value you enter here should be a compromise between a short timespan (which generates traffic with the provider) and a long re- registration period. Further help under Topology COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 478 -...
Important: All settings made for the selected identity are deleted without asking you to confirm. If you back up the settings for an identity to a data storage device first, you can restore them if required. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 480 -...
Used to verify the user name. Identical to the password assigned by the VoIP provider when the identity was being created or the password entered in the PBX. Further help under Identities COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 481 -...
Page 482
Enter the authentication username provided by the VoIP provider. You need the authentication username when you register with a VoIP provider. If you connect to an Auerswald PBX, you do not need to enter the authentication ID. Further help under Identities COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022...
Options for experts Options for experts Registrar Function codes Audio Security Outbound proxy Fallback for Ringer Tone COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 483 -...
Time lapse registration (min.) 5 … 60 minutes The registration time is the number of minutes that must elapse before the telephone reregisters itself with the VoIP provider. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 484 -...
Page 485
The value you enter here should be a compromise between a short timespan (which generates traffic with the provider) and a long re- registration period. Further help under Identities COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 485 -...
Note: If very large data packets are present, TCP is used instead of UDP. The maximum size of a data packet can vary according to the network. (RFC 3261 > TCP) COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 486 -...
Page 487
The device sends exactly one subscription to the PBX/provider. No other subscriptions are sent. • Fixed interval Attempts to subscribe on the PBX/provider are made at the specified interval. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 487 -...
Page 488
• Redouble interval The set number of seconds doubles after each attempt to register on the PBX/provider. Interval in seconds Sets the time gap between two subscription attempts. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 488 -...
Page 489
Minimum: 1 sec Default: 10 sec Further help under COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 489 -...
Identities RTP NAT traversal Requirement: • Configured DNS server Active NAT traversal is performed by the telephone. To do this, you must also specify a STUN server. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 490 -...
Page 491
Enable the best possible transmission route to be found between the phone and PBX/provider. Note: ICE must only be activated if the other end supports ICE. Further help under Identities COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 491 -...
The sent display text in the From header is "anonymous". User anonymous Both the display text and the User name section in the From header is "anonymous". Further help under Anonymous call COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 492 -...
Best available quality: G.711, G722 Best available compression: G.726, G.729, iLBC Note: Codecs that are assigned multiple times are automatically removed from the list and replaced with---. Further help under Codecs COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 493 -...
Switches on negotiation for the encryption of call data via SRTP. When a call is made, the call partner will be asked if encryption is possible. If COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 494 -...
Page 495
Note: For each device variant, simply shows whether a certificate is installed and where processing can take place, if relevant. Further help under Identities Further help under Certificate COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 495 -...
Further help under Outbound proxy Port Port for the outbound proxy. Note: The Port must be filled out if mode Manually is selected. Further help under Outbound proxy COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 496 -...
Page 497
Alternative URL Alternative server address for the outbound proxy. Further help under Outbound proxy Alternative port Alternative port for the outbound proxy. Further help under Outbound proxy COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 497 -...
Configured identity: displays Identity + seq. no. Note: A fallback identity can also be created for identities that have not yet been configured. Further help under Fallback identity COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 498 -...
Ringer Tone Ringer Tone Ringer Tone Assigns a ringtone to the identity. Further help under Sound COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 499 -...
Refreshes the list of available Bluetooth devices. Further help under Bluetooth Show received files Here, you can modify the selected sorting process. Further help under Bluetooth COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 500 -...
Page 501
Bluetooth Connected devices Displays these settings: • Name • Use for Select the type of use dependent on paired device. Further help under Bluetooth COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 501 -...
Select the required Wi-Fi security standard. Advanced options Select proxy and IP settings. Further help under Wi-Fi update Refreshes the list of available wireless networks. Further help under Wi-Fi COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 503 -...
Page 504
Notices:The Wi-Fi router/access point must support the simplified procedures. Further help under Wi-Fi Configure Wi-Fi Opens the Wi-Fi configuration dialogue. Details about the settings are in Configure Wi-Fi COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 504 -...
Keep Wi-Fi on during sleep Always The Wi-Fi connection is kept open during sleep. Never The Wi-Fi connection is closed when the device enters sleep mode. Further help under Wi-Fi COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 505 -...
Opens a list with six predefined default names. Select an entry in the list to open another menu in which you can assign a ringtone to the call type. Search term COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 506 -...
Page 507
Assigns a ringtone to the alert info from the PBX/provider’s SIP Invite. Further help under Sound Silence on user proximity Switches Silence on user proximity on. Further help under Gesture control COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 507 -...
Further help under Language and location Language web interface Changes the language used on the web interface Further help under Language and location COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 508 -...
Brightness Sets the brightness. Note: Any changes you make to the brightness affect on all key extension modules that are connected. Further help under Display and LED COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 509 -...
Page 510
The message key LED shines and a text message is displayed in the Notifications menu. • LED is flashing The message key LED flashes and a text message is displayed in the Notifications menu. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 510 -...
Page 511
If the ambient light is very bright, the keypad brightness is switched off. Further help under Display and LED COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 511 -...
Page 512
Camera as wallpaper Opens a menu in which you can select one of the configured cameras that is to be used as the wallpaper for the idle screen. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 512 -...
Page 513
Display and LED Further help under Cameras COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 513 -...
This acoustic signal indicates that there is an incoming call during a call. If this option is disabled, incoming calls are only signalled by a change in the display content during a call. Further help under Call waiting COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 516 -...
On no reply Forwards incoming calls to the set destination number if these calls have not been taken within a set time. Further help under Call forwarding COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 518 -...
Page 519
Further help under Call forwarding Waiting time before call forwarding Sets the number of the seconds that the phone waits before activating call forwarding. Further help under Call forwarding COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 519 -...
Anonymous call Anonymous call Anonymous call Stops your phone number from being displayed to the person you are calling COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 520 -...
Reverse search Reverse search Reverse search For incoming and outbound calls, this option displays the names of saved contacts that are suitable for the phone number. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 521 -...
Seconds until start of call You can use the sliding adjuster to set the number of the seconds that the phone waits before making the automatic call. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 522 -...
Waiting time before call starts in s Shows the number of seconds the device will wait before starting the call to the specified destination. Further help under Direct call COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 523 -...
Active calls are put on hold when InterCom calls are received. Note: For active calls to be interrupted, the Call waiting function must be enabled. Further help under Automatic call acceptance COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 524 -...
Call Completion Call Completion Call Completion The callback is triggered automatically by the PBX. Further help under Call Completion COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 525 -...
Activates the logging of incoming and outgoing calls. Note: If the function is switched off, calls cannot be started by redialling the number. Further help under Log calls COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 526 -...
− phone numbers with more than 3 digits − phone numbers that do not start with 55 − phone numbers with digits outside the range 1 to 4 after 55 COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 527 -...
Page 528
Select the camera whose images are to be displayed. Further help under Call bindings Softkeys | key 1/2 Selects a configured function key. Further help under Call bindings COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 528 -...
Function keys Function keys Managing function keys Edit function keys Edit parameters COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 529 -...
Adds an entry to the list, above the marked position. Further help under Function keys Edit Opens a dialogue in which parameters can be configured for the selected key. Further help under Function keys COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 530 -...
Displayed beside each function key on the screen. Delete Deletes the marked function key in the list. Cancel Closes the menu without adopting changes. Save Saves the entered parameters and close the window. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 531 -...
CF ext. calls: On busy CF ext. calls: On no reply Do not disturb DTMF-Relay Group Group (incoming) Group (outgoing) Park position Relays Silent Alert XML Minibrowser COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 532 -...
Note: Pickup should not be used if the key is only used to switch functions in the PBX using a programming code. Deactivate Pickup in that case. Further help under Pick-Up COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 533 -...
Page 534
Signalise missed call If this function is enabled, missed calls associated with the speed dial number are signalled with flashing green LEDs. Further help under Speed dial COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 534 -...
Identity Identity Identity Identity used to trigger subsequent calls. Further help under Identities COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 535 -...
Identity Identity for which this function is set up. Further help under Identities Configuration id The PBX assigns the configuration ID automatically. Further help under Function templates COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 536 -...
Anonymous call Anonymous call No parameters necessary. Further help under Anonymous call COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 537 -...
Identity for which this function is set up. Further help under Identities Identification number for system relay with Automatic configuration switchover operating mode (900, in the factory settings). Further help under Function templates COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 538 -...
Bluetooth Bluetooth No parameters necessary. Further help under Bluetooth COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 539 -...
Identities Note: Only assign the Identity parameter if PBX function templates are used. Further help under Function templates Destination Call forwarding destination Further help under Call forwarding COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 541 -...
Identities Note: Only assign the Identity parameter if PBX function templates are used. Further help under Function templates Destination Call forwarding destination Further help under Call forwarding COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 542 -...
Identities Note: Only assign the Identity parameter if PBX function templates are used. Further help under Function templates Destination Call forwarding destination Further help under Call forwarding COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 543 -...
Call waiting Call waiting No parameters necessary. Further help under Call waiting COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 544 -...
PBX configuration), for which call forwarding is to be performed. PTP connection:Header plus extension for which call forwarding is to be performed. Destination Call forwarding destination Further help under Function templates COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 545 -...
PBX configuration), for which call forwarding is to be performed. PTP connection:Header plus extension for which call forwarding is to be performed. Destination Call forwarding destination Further help under Function templates COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 546 -...
PBX configuration), for which call forwarding is to be performed. PTP connection:Header plus extension for which call forwarding is to be performed. Destination Call forwarding destination Further help under Function templates COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 547 -...
Do not disturb Do not disturb Identity Identity for which this function is set up. Further help under Identities Further help under Do not disturb COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 548 -...
DTMF-Relay DTMF-Relay DTMF sequence Numbers needed to perform the required function. Further help under Function templates COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 549 -...
Group Group Identity Identity for which this function is set up. Further help under Identities Group Group telephone number Further help under Function templates COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 550 -...
Group (incoming) Group (incoming) Identity Identity for which this function is set up. Further help under Identities Group Group telephone number Further help under Function templates COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 551 -...
Group (outgoing) Group (outgoing) Identity Identity for which this function is set up. Further help under Identities Group Group telephone number Further help under Function templates COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 552 -...
Park position Park position Number/URI Phone number of the park position. Identity Identity for which this function is set up. Further help under Park position COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 553 -...
This function key is not suitable for manual relays. For additional Information, refer to the Advanced Information about the PBX. Further help under Function templates COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 554 -...
Caution: The function can only be executed if the appropriate URL has been entered. Delay Countdown counter. The alarm is triggered after the countdown reaches zero. Further help under Silent Alert COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 555 -...
XML Minibrowser XML Minibrowser Number/URI Web server address Further help under XML Minibrowser COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 557 -...
Note: The value for the images actually transferred depends on which type of camera is used. Further help under Cameras Username Enter the user name, if necessary. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 558 -...
Page 559
Enter the password, if necessary. Further help under Cameras Use for incoming calls only The camera image display is only activated for incoming calls. Further help under Cameras COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 559 -...
Further help under Update Restart phone Restarts the telephone. Caution: This interrupts all connections, all calls and data services. Unsaved data is lost! Further help under Update COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 560 -...
Page 561
Resets the telephone to the factory settings. Any saved data and settings are deleted. The phone is shut down and then restarted. Further help under Reset to default COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 561 -...
The phone obtains the provisioning server's URL from the redirect server. Further help under Using provisioning Provisioning from PBX search Automatic provisioning of the phone is performed via the PBX. Further help under Using provisioning COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 562 -...
Page 563
This URL is required if it is not obtained via DHCP or a redirect server. Further help under Using provisioning Vendor templates Activates templates and scripts that are specially designed to run on Auerswald/FONtevo PBXs. Further help under Function templates COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 563 -...
Password web interface Displays the password entry/modification dialogue for the web interface. Note: When you define the password, comply with the conventions for secure passwords. Further help under Passwords COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 564 -...
Page 565
Web administration (https) is inactive. Further help under Action URL Action URL server Required to send events. No entry required if only commands are received. Further help under Action URL COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 565 -...
Activates the display and use of Firefox Klar. Note: If the function is not activated, the app is not displayed in the overview of installed apps. Further help under Apps COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 566 -...
Date and time Time zone Data on the phone that has a time stamp (such as call history entries, calendar entries and e-mails) is displayed with the correct time. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 567 -...
Page 568
Date and time Further help under Date and time COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 568 -...
Sorting algorithm (by First name, by Last name) Further help under LDAP Name format Defines the format in which names are displayed (First name first, Last name first). Further help under LDAP COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 569 -...
Page 570
Further help under LDAP Number search outgoing If "Number search outgoing" is enabled, the display name is searched for via LDAP, for outgoing calls. Further help under LDAP COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 570 -...
Displays the build number of the software version installed on the device. MAC address Displays your device's physical address on the network. Android version Displays the Android version installed on your device. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 571 -...
Page 572
• End User License Agreement • Data protection • Open source licenses • Android licenses • Webview licenses system • Webclient licenses Further help under Device Information COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 572 -...
Page 575
NAT traversal Open source licenses POP3 Port Prefetch Using provisioning Redirect Server Registrar router Rubber cover Server SIP port SIPS SLAAC SMTP server STUN Subnet mask Switch COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 575 -...
Page 576
Technical Terms and Functions Update update server VLAN VoIP VoIP account VoIP address VoIP provider Dial preparation Certificate COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 576 -...
Account Account Authorisation to access a VoIP provider or a VoIP PBX. Users must identify themselves by logging in with a username and a password. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 577 -...
Special software, loaded from a bootable data medium by the firmware and then executed. The Bootloader then loads other parts of the operating system, including usually a kernel. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 578 -...
Build number Build number The build number is a sequential number, automatically assigned during a build process. The build number is part of the software version number. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 580 -...
Call Deflection – refers to call forwarding during the ringing period. If Call Deflection has been activated, the called subscriber can deflect the call on a case-to-case basis while the telephone is still ringing. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 581 -...
Client Client Piece of computer hardware or software that accesses a service made available by a server. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 582 -...
There are various codecs that feature different voice data compression rates thereby require different band widths for data transmission. The equality of VoIP calls is dependent on the codec used. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 583 -...
The IP address is temporarily allocated for a certain amount of time. If the address is no longer required by the client, the server has access to it again, and can allocate it to another client. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 584 -...
Internet (for examplewww.auerswald.de is assigned to the corresponding IP address. This service is provided by DNS servers at the various Internet service providers or by upper domain servers. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 585 -...
Globally unique name of a website, consisting of third-level domain (e. g. the service name “www“), second-level domain (e. b. “auerswald“) and top-level domain (e. g. the country code “uk“). The domain is part of the URL. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 586 -...
Downdate Downdate Reset of the telephone to the previous firmware version. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 587 -...
DTMF DTMF Dual Tone Multi Frequency dialling – dialling method that transmits the dialled number to the exchange as two superimposed sinusoidal signals. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 588 -...
End device End device Device that can be operated on a communication network or on a PBX, e. g. telephone, fax machine, answering machine, ISDN PC controller, etc. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 590 -...
Ethernet Ethernet Network system with a speed of 10/100/1000 Mbit/s developed by the companies INTEL, DEC and Xerox. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 591 -...
Network security component that uses a set of security rules to protect a computer network or an individual computer against unauthorised access to or from the network. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 592 -...
Firmware Firmware Operating software on the telephone or PBX that is stored in the device itself. The device cannot function without firmware. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 593 -...
PC or router that acts as an intermediary between two networks. The Internet service provider is the gateway for direct Internet dial-up connections. If you use a router, this is the gateway in a local network. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 595 -...
HOST HOST Component of a data processing system that manages larger application programs and data volumes and makes them available to lower-order servers and clients. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 596 -...
HTTP HTTP Hypertext Transfer Protocol Secure – communication protocol for tap- proof data transfer with encryption within the World Wide Web. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 597 -...
NATs and firewalls makes it difficult for them to do so. ICE uses the STUN (Session Traversal Utilities for NAT)- and TURN (Traversal Using Relays Around NAT) protocols to establish a connection. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 598 -...
POP3 (e-mails are stored on a server, not on the client PC, so that they cannot be lost due to a failure of the client PC). COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 599 -...
IP address IP address Unique numerical address within a TCP/IP network that is assigned to one device and ensures that data packages reach the correct recipient. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 600 -...
Ipsec Ipsec The telephone uses the IPsec protocol to transport IP packages cryptographically secured via public networks. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 601 -...
Internet, none of the data on the computers in the local network can leak out or be accessed externally. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 602 -...
3001:00FF:ABC0:0EAC:0001:0000:0000:000F or, in short form, 3001:FF:ABC0:EAC:1::F. Thanks to the longer address format, IPv6 offers a greater number of possible IP addresses than the Internet Protocol Version 4 (IPv4). COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 603 -...
Buffers RTP packages, to compensate irregular transfer rates of the Internet. A high jitter buffer reduces short interruptions during the call. In return the delay of the RTP packages increases. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 604 -...
LDAP LDAP Lightweight Directory Access Protocol – protocol that enables you to query the data in a directory service (a hierarchical database) over the network. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 605 -...
Light emitting diode - electronic device similar to a lamp and used for displays (also multi-coloured). COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 606 -...
Link Layer Discovery Protocol – the protocol IP phones use to collect and query device-specific information from devices directly connected in the network. LLDP-MED – LLDP software upgrade that supports special VoIP apps. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 607 -...
This means that the network card unique and can be controlled without any problems and detected by the network The IP addresses on the TCP/ IP network are always mapped to the respective MAC address. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 608 -...
IP address used by another network. This function is e.g. performed by a router which connects a local area network to the Internet. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 609 -...
NAT traversal NAT traversal Method to establish and hold communication connections that allows IPsec-encrypted data packets to pass trough NAT transition points. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 610 -...
If a local NTP server is available in a local network, it can be selected, or a public NTP server from a public list on the Internet can be used. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 611 -...
Open source licenses Software license acknowledged by the Open Source Initiative (OSI). Open-source licenses are the basis of free-of-charge applications whose programming code may be modified without restrictions. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 612 -...
VoIP telephones, receive both power and data via an Ethernet cable. Benefit: Fewer obtrusive power cables are required. PoE is described in the IEEE 802.3af standard. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 613 -...
POP3 POP3 Post Office Protocol, version 3 – ASCII protocol to download e-mails from a server. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 614 -...
PCs usually provide their services on ports 1 to 1023. Outgoing connections are usually established starting at Port 1024. Most services that use the standard port numbers (for example, web browsers use port 80). COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 615 -...
The loading of memory contents before a requirement for them has become obvious. When the requirement actually occurs, this enables a faster access speed to be achieved. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 616 -...
Using provisioning Using provisioning Automatded configuration of one or more telephone(s) from a provisioning server. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 617 -...
A SIP registrar tells the phone where it can register itself. The information given here is the URL set by the VoIP provider on the IP address on which the registering PBX can be accessed. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 619 -...
In a home network, routers are usually used to connect the local network to the Internet and to enable simultaneous Internet access for multiple users. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 620 -...
1 to 20% is acceptable, depending on the codec in use. RTP does not guarantee the service quality of the data transfer. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 621 -...
Rubber cover Rubber cover Rubber cover which must be removed before the key extension module can be mounted. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 622 -...
Computer or software that performs different tasks as part of a network and, for example, provides other users (clients) of this network with specific information, data or services. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 623 -...
SIP is only used to negotiate the communication conditions. Other protocols such as RTP are responsible for actual data transfer. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 624 -...
SIP port SIP port Port of the local system used as the communication port for the SIP transfer. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 625 -...
The provider encrypts external connections to prevent listening in. The processes used to set up and shut down a connection, and signalling, are all encrypted by SIPS. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 626 -...
SLAAC is the further development of "classic" processes for IP auto configuration in IPv4. IPv6 routers have an active role, unlike those in IPv4. IPv6 offers the same convenience as operating a very simple DHCP server. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 627 -...
PBX and external mail servers. The PBX needs an external SMTP server (outgoing mail server) to send system e- mails or forward voice mail messages and fax messages. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 628 -...
Internet connection. To do this, a STUN request is sent to a STUN server, which then shares its own IP address allocated by the VoIP provider with the Internet connection. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 629 -...
IP address is used as a part of the PC address. The value of the subnet mask, as with IP addresses, is often given in decimal form (for example, 255.255.255.0 for IPv4 addresses). COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 630 -...
Switch Switch Active network distributor that distributes data packages to a destination defined by an IP address among the different segments of a network. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 631 -...
To ensure this happens, a large amount of information is sent along with the actual payload data. Most Internet services are implemented with TCP, e.g., HTTP (WWW), SMTP/POPS (e-mail), etc. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 632 -...
Layer Security – protocol for the encryption and secure transmission of data on the Internet. TLS is often used to protect http connections, e. g. for commercial transactions (https). COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 633 -...
Update Update Installation of a new firmware version to integrate new features and to solve possible problems. Previous settings of the device remain unchanged. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 635 -...
Server that provides up-to-date data, e. g. firmware files, provider profiles, etc., for downloading to a telephone. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 636 -...
• the mechanism used to access a resource • the specific computer on which the resource is present • the specific name of the resource (or the file name) on the computer COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 637 -...
Uniform Source Locator – complete address of a resource (e. g. a website), consisting of a scheme (e. g. „http://“) and a scheme-specific part (e. g. domain „www.auerswald.de/“ and path „en/products/pbx/home- office.html...“). COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 638 -...
VLAN, although the subnets might be connected to shared switches. Among other things, a VLAN can be used to keep IP telephony separate from normal network traffic, at network level. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 639 -...
Internet. The transmission quality and the reliability of Voice over IP depends to a great extent on the quality of the Internet connection used. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 640 -...
Internet, and also an account with a username and password. The registered connection usually becomes active within a few minutes and can be used very soon after that. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 641 -...
VoIP address VoIP address VoIP telephone number plus domain, separated by the @ character: <subscriber>@domain. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 642 -...
VoIP provider VoIP provider Internet service provider offering internet telephony (VoIP, Voice over Internet Protocol). COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 643 -...
(LAN) into your own network via a VPN tunnel. The tunnel serves as a shell in which the data is embedded and transported from one network to the other. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 644 -...
Dial preparation Dial preparation Dialling of a number before a call is initiated by lifting the receiver. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 645 -...
Tags can be nested, enabling a hierarchy to be created. A Document Type Definition (DTD) describes the structure and grammar used in documents. It is an XML system component and is enabled by default. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 646 -...
Certificate Certificate Digital key issued by a Certification Authority (CA) to ensure the authentication and secure transmission of e-mails, web sites, etc. COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 647 -...
Dual Tone Multi Frequency Dual TMrequency ESMTP Simple Mail Transfer An integral parrt of e-mail, Protocol extended SMTP HTML Hypertext Markup Language Defines the structure of a website COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 648 -...
Page 649
Light-emitting diode Light emitting diode Media Access Control Physical addree of a network interface Network Address Translation Network Time Protocol Private Branch Exchange Private PBX Power over Ethernet COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 649 -...
Page 650
Most widely used security protocol, provides a secure channel between two computers working over the Internet or an internal network STUN Simple Transversal of UDP over NATs Transmission Control Protocol COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 650 -...
Page 651
Uniform Resource Locator Uniform Resource Pointer Universal Serial Bus VLAN Virtual Local Area Network Voice Mailbox voice mailbox VoIP Voice over Internet Protocol Virtual Private Network Extensible Markup Language COMfortel D-600 - Firmware V2.4 - Advanced Information V09 11/2022 - 651 -...
Need help?
Do you have a question about the COMfortel D-600 and is the answer not in the manual?
Questions and answers