Table of Contents
Advertisement
IDE HDD Auto-Detection
Press Enter to auto detect the HDD's size, head...on this channel.
IDE Primary/Secondary M aster/Slave
Press Enter to select Manual or Auto type. Note that the specifications of your
drive must match with the drive table. The hard disk will not work properly if you
enter improper information for this category. If your hard disk drive type is not
matched or listed, you can use Manual to define your own drive type manually.
If you select Manual, related information is asked to be entered to the following
items. Enter the information directly from the keyboard. This information should
be provided in the documentation from your hard disk vendor or the system
manufacturer.
Access M ode
Capacity
Cylinder
Head
Pr eco mp
Landing Z one
Sector
System Information
Press <Enter> to for the sub-menu of each item:
BIOS Version/CPU Type/CPU ID/uCode ID/CPU Frequency/CPU L2 Cache/
Total System Memory/
This item shows BIOS version, the CPU related information and the memory status
of your system (read only).
The settings are CHS, LBA, Large, Auto.
The formatted size of the storage device.
Number of cylinders.
Number of heads.
W rite precompensation.
Cylinder location of the landing zone.
Number of sectors.
4-6
Advertisement
Table of Contents
