Table of Contents
Advertisement
Card Reader Connector: CR1
The mainboard provides a connector to connect the Card Reader on the Front
Panel.
CPU Fan Connectors: CPUFAN1/SYSFAN1
The CPU Fan/System Fan connectors support system cooling fans with +12V
that is controlled by PWM. W hen connecting the wire to the three-pin head connectors,
always note that the red wire is the positive and should be connected to the +12V (that
is controlled by PWM), the black wire is Ground and should be connected to GND.
SENSOR
CD-in Connector: CDIN1
The connector is for CD-ROM audio connector. If you want to use other audio-
in functions such as TV-in, you can also use this connector.
AUX-in Connector: TVIN1
The connector is for CD-ROM audio connector.
FAN Power
GND
SYSFAN1
CDIN1
TVIN1
2-14
CR1
SENSOR
FAN Power
GND
CPUFAN1
L
GND
R
L
GND
R
Advertisement
Table of Contents
