Table of Contents
Advertisement
DRAM Clock/Drive Control
Press <Enter> to enter the sub-menu and the following screen appears:
Current FSB Frequency
Those two items are read-only to show the current FSB Frequency information.
DRAM Clock
Use this field to configure the clock frequency of the installed DRAM. Settings:
By SPD/100MHz/133MHz/166MHz/200MHz.
DRAM Timing
The value in this field depends on performance parameters of the installed
memory chips (DRAM). Do not change the value from the factory setting unless
you install new memory that has a different performance rating than the original
DRAMs.
DRAM CAS Latency
The field controls the CAS latency, which determines the timing delay before
SDRAM starts a read command after receiving it. Setting options: [1.5], [2], [2.5],
[3] increases system performance while 2.5T provides more stable system
Advanced Chipset Features
4-9
Bios Setup
Advertisement
Table of Contents
