Table of Contents
Advertisement
Chapter 4
Quick Boot
Setting the item to [Enabled] allows the system to boot within 5 seconds since it will
skip some check items. Available options: [Enabled], [Disabled].
M PS Table Version
This field allows you to select which MPS (Multi-Processor Specification) version to
be used for the operating system. You need to select the MPS version supported by
your operating system. To find out which version to use, consult the vendor of your
operating system. Settings: [1.4], [1.1].
Boot Sequence
The items allow you to set the sequence of boot devices where BIOS attempts to
load the disk operating system.
Boot Other Device
Setting the option to [Enabled] allows the system to try to boot from other
device if the system fails to boot from the 1st/2nd/3rd boot device.
MSI Reminds You...
Available settings for "1st/2nd/3rd Boot Device" vary depending on the
bootable devices you have installed. For example, if you did not install
a floppy drive, the setting "Floppy" does not show up.
Advanced BIOS Features
4-8
Advertisement
Table of Contents
