Table of Contents
Advertisement
Exhaust filter
1. Remove the exhaust filter.
● Donotremovewhile
● A fterremovingthe
2. Wipe clean with a wrung out towel.
● R emovethelintandthen
wipe it with a wrung out
towel.
Attention
● A ftermaintenance,besuretoinstallthe
exhaust filter back to its original position.
To prevent abnormal drainage drain filter cleaning (about once a week)
■ C lean the drain filter when the indicator is flashing.
※ Especially when in Dry Mode, lint is easy to accumulate, so
please clean it every time.
※ If foreign objects such as lint are not removed, they may
cause the internal drainage pipe to be blocked. When
washing, if U11appears on the panel, please refer to P.45.
※ Do not open the drain filter while washing, otherwise it
cause serious water leakage.
How to take out the drain filter (the diagram below)
① Be sure to turn off the power after "Spin" is completed,
and then remove the cover.
② When the drain filter is removed, water will flow out.
Please install the sub drain outlet.
③ A fter loosening the drain filter in a counterclockwise
direction, confirm there is no residual water, and then
take out the drain filter.
①
②
NA-V180HDH(s)_160HDH(s)-English.indb 41
Wipe with a soft cloth.
●
in operation.
filter, do not wash the
side of the machine
body or put anything
When the dirt
into it.
is serious
Can wipe
with neutral
detergent used
in the kitchen.
will
Rotate
③
When dirty
Main unit/Window seal
If there is any lint, water droplet or foreign object on the inside around
the edge of the door, please wipe it off with a wrung out towel.
(so as to avoid blockage by the lint which may cause water
leakage and odors)
Attention
●
Do not use detergent, thinner, gasoline, alcohol, kerosene, etc.
● When the machine body (especially the door and the operation
panel) gets wet with detergent or softener, it should be wiped
with a wrung out towel immediately.
(in order to avoid peeling of printed fonts, resin damage or metal
corrosion, or abnormal movement.)
Especially the resin part may crack when concentrated liquid
detergent gets into it; please be careful.
How to lock the drain filter.
④ "c" and "screw" are aligned and pushed in. Then
rotate 2 times clockwise until "c" and "screw"
are aligned.
Screw
※ Please make sure to turn to the
fixed position otherwise it will
cause water leakage.
⑤ Please remove the sub drain outlet.
⑥ Please install the cover.
⑥
⑤
④
41
2022/6/10 下午 10:27:29
Advertisement
Table of Contents
