Table of Contents
Advertisement
How to put in Detergent
and Softener
■ Detergent case
Softener
●
If the detergent does not flow
easily, please have it fully
dissolved in water before putting it
in (up to about 70 ml).
• The liquid level should not exceed
the position marked with "MAX".
• Do not close the box too hard (or
the softener will come out immediately and lose its effect).
• Because of its siphon structure, a very small amount of liquid
will remain, which is not abnormal.
●
Do not use softener that will cause separation or
solidification (to prevent softener or water from remaining in
the detergent case).
22
NA-V180HDH(s)_160HDH(s)-English.indb 22
Powder
To prevent powder residue
●
●
●
Liquid
●
C hlorine-containing bleach cannot be used on colored
clothes (so as not to fade).
●
B ecause liquid soap is easy to solidify, please dissolve it in
500 ml warm water at about 30 °C before putting it in.
The following items cannot
Softener
(equal
solution
amount of)
water
●
„ When making an appointment
●
D o not use chlorine bleach.(so as not to cause metal
corrosion or malfunction)
●
D o not use liquid soap.(so as not to block and cause
water leakage)
●
When using bleach, do not use powder and liquid
together.
(so as not to solidify)
(Example) Powder detergent and liquid bleach, or liquid
detergent and powder bleach
(Synthetic Detergent/
Bleach)
Please wipe it dry if it gets wet.
For the insoluble detergent, please
dissolve it with water before putting it
in.
Please crush the agglomerated part
before putting it in.
Synthetic Detergent/
Bleach/Soap
Do not pour into the
detergent case.
(please follows the contents on the container for
application)
●
G el ball type detergent
(laundry ball)
●
L aundry fragrance particles
(laundry ball) etc.
(to avoid water leakage or malfunction due to
insolubility in water and blockage)
be used
●
P owder soap
●
S oda powder
(to avoid water leakage or
malfunction due to insolubility
in water and blockage)
When powder detergent is difficult to dissolve
•
Please dissolve it in warm water (about 30 °C) and
put it directly into the tub.
To dissolve completely, add it little by
little while stirring.
2022/6/10 下午 10:27:11
Advertisement
Table of Contents
