Safety Alerts - Hover-1 ALPHA PRO Operation Manual

SAFETY ALERTS

If a system error occurs or an improper operation is performed
while riding your Alpha Pro, the device will alert the user in a
variety of ways.
The following are common occurrences that will produce safety
alerts. These notices should not be ignored and appropriate action
should be taken to correct any improper operation, failure, or errors.
• Prohibited riding surfaces (uneven, too steep, unsafe, etc.)
• Battery voltage is too low.
• The E-Scooter is still charging.
• The E-Scooter is overheating, or the motor temperature is too high.
• When the battery is about to run out of power, the battery icon
will flash.
• If any or both tires are blocked, the device will stop after 10
seconds.
• When the battery level has depleted below protection mode, the
motor will power off after 15 seconds.
• If a high discharge current is produced during use (such as riding up
a steep slope for a long period of time), the motor will shut off after 15
seconds.
24